We’d like to recommend one-to-many series: 4 channel 30amps AC RF remote control gadget (4S1PUA-AC220+1CV-4), which includes 1 transmitter and 4 receivers. The transmitter’s transmission distance is 500m/1500ft theoretically. It is designed for high power device. Then maximum current is 30amps. This wireless gadget can remote control high power lights, TVs, motors, fans, cameras, video signals, audio signals, electrical operated doors/locks/windows/blinds/cars or other appliances with voltage of AC 110~240V or DC0~28V.
One transmitter can remote control 4 receivers simultaneously. If you want to use two or more receivers in the same place, you can set them with different codes. It operates in three modes, including toggle, momentary and latched. All working modes can be switched easily by connecting or disconnecting jumper.
We’d like to show how to remote control ac, dc lamps or ac motor.
The contact of relay of each receiver is normally open/ closed. So you need to wire dc lamp to normally open contact B&C and supply DC 12V power to lamp. When you want to remote control ac motors or lamps, you can wire them to receivers as mentioned above. But ac motor and lamps can share the same power supply if you wire as the right picture shown.
Operation:
Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on the relay of the receiver 1 (connect A and B, disconnect A and C)
Press button 1 again: Turn off the relay (disconnect A and B, connect A and C)
Press button 2: Turn on the relay of the receiver 2 (connect A and B, disconnect A and C)
Press button 2 again: Turn off the relay (disconnect A and B, connect A and C)
Press button 3: Turn on the relay of the receiver 3 (connect A and B, disconnect A and C)
Press button 3 again: Turn off the relay (disconnect A and B, connect A and C)
Press button 4: Turn on the relay of the receiver 4 (connect A and B, disconnect A and C)
Press button 4 again: Turn off the relay (disconnect A and B, connect A and C)
Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button 1: Turn on the relay of the receiver 1 (connect A and B, disconnect A and C)
Release button 1: Turn off the relay (disconnect A and B, connect A and C)
Press and hold button 2: Turn on the relay of the receiver 2 (connect A and B, disconnect A and C)
Release button 2: Turn off the relay (disconnect A and B, connect A and C)
Press and hold button 3: Turn on the relay of the receiver 3 (connect A and B, disconnect A and C)
Release button 3: Turn off the relay (disconnect A and B, connect A and C)
Press and hold button 4: Turn on the relay of the receiver 4 (connect A and B, disconnect A and C)
Release button 4: Turn off the relay (disconnect A and B, connect A and C)
Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On; other relays Off; Press another button -> Off.
Press button 1: Turn on the relay of the receiver 1 (connect A and B, disconnect A and C)
Turn off the relay of the receiver 2, 3, 4 (disconnect A and B, connect A and C)
Press button 2: Turn on the relay of the receiver 2 (connect A and B, disconnect A and C)
Turn off the relay of the receiver 1, 3, 4 (disconnect A and B, connect A and C)
Press button 3: Turn on the relay of the receiver 3 (connect A and B, disconnect A and C)
Turn off the relay of the receiver 1, 2, 4 (disconnect A and B, connect A and C)
Press button 4: Turn on the relay of the receiver 4 (connect A and B, disconnect A and C)
Turn off the relay of the receiver 1, 2, 3 (disconnect A and B, connect A and C)
Follow