August 2014 – Page 3 – Remote Control Everything

15 Channel RC System

This 15 Channel 6V 9V 12V 24V rf remote controller (15S1UB-DC06/09/12/24 & CP-15) is designed to learn remote codes and used in one-transmitter-to-many-receivers system. It operates in toggle, momentary, and latched mode (switching modes as you like freely by connecting or disconnecting jumper). It is great for hard to reach lights or other DC/AC electrical devices with the transmission distance 500m (theoretically). Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V. Receiver has DC input contact and you should supply dc power to receiver.

We’d like to show the wiring and controlling of ac, dc lamps or dc motors.

The contact of relay of each receiver is normally open/ closed. So you need to wire ac lamp to normally open contact B&C and supply AC 220V power to lamp. When you want to remote control dc motors or lamps, you can wire them to receivers as mentioned above. But dc motor and lamps can share the same power supply if you wire as the right picture shown.

Operation:

Setting control mode Toggle: Connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press button 1 again: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Press button 15 again: Turn off Receiver 15 (disconnect B and C, connect A and B)

Setting control mode Momentary: Connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Release button 1: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press and hold button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Release button 15: Turn off Receiver 15 (disconnect B and C, connect A and B)

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 15 (disconnect B and C, connect A and B)

DC power output wireless kit of remote control one light

The wireless remote control equipment consists of one receiver and one transmitter. It is model: S1XL-DC12 & C-2. The receiver (S1XL-DC12) is 1 CH and output power includes DC 06/09/12/24V. The transmitter (C-2) can remote control receiver and working distance is 100m/300ft theoretically. The equipment can control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances. So you can connect one light to receiver and use the wireless transmitter to remote control light on/off.

Besides, you can connect wires between light and receiver according to the circuit diagram of receiver: connect one light to “A & B” terminal of receiver. Then supply power to receiver. If you press the button of transmitter, the light will turn on/off by wireless remote control.

L mode is the only one control mode for the wireless remote control kit. You can operate as the processes:

Press button 1: Turn on lamp, terminal A&B output DC power.

Press button 2: Turn off lamp, terminal A&B no output.

Finally if you want to know more something about the wireless remote control equipment, you can also enter into the website and search the product as following:

Model: 0020416 (S1XL-DC12 & C-2)

Website: http://www.carymart.com/1ch-dc-6v-9v-12v-24v-output-remote-control-transmitter-receiver-kit-latched-mode-p-1405.html

RF website: http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_244_263&products_id=1237

How to Remote Control 15 Electric Devices with One Transmitter

We recommend this kit-1 Transmitter & 15 Receivers (15S1UB-AC220 & CP-15). It can be applied in controlling lighting, motors, fans, electrically operated doors / locks / windows / blinds / cars or other electric devices with AC 110~240V or DC 0~28V. Its transmission distance is about 500m/1500ft. It has toggle, momentary and latched working modes. You can connect or disconnect jumper to the receiver to switch those working modes. This kit includes 15 receivers and 1 transmitter, so you can connect 15 electric devices to 15 receivers and control electric devices with only one transmitter.

We’d like to show how to remote control ac, dc lamps or ac motor.

The contact of relay of each receiver is normally open/ closed. So you need to wire dc lamp to normally open contact B&C and supply DC 12V power to lamp. When you want to remote control ac motors or lamps, you can wire them to receivers as mentioned above. But ac motor and lamps can share the same power supply if you wire as the right picture shown.

Mode switching and operation:

Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press button 1 again: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Press button 15 again: Turn off Receiver 15 (disconnect B and C, connect A and B)

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Release button 1: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press and hold button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Release button 15: Turn off Receiver 15 (disconnect B and C, connect A and B)

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, another relay Off; Press another button -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 15 (disconnect B and C, connect A and B)

One Receiver and 4 Transmitters Remote Control 4 Lamps

One of our customers wants a simple wireless remote operate 4 led lamps from several room at his house. He needs 4 transmitters and a receiver which can be mounted in a designated place. The remote must work from receiver about 50m away and not line of sight through doors and walls.

We suggest him choose dc 4 channel remote control system (S4C-DC12& 4C-1). Maximum working current is 5amp each relay. Working distance of remote and receiver set is about 100m (300ft) in open field. This 4CH 6V9V/12V/24V wireless remote switch operates in toggle, momentary, latched, toggle + momentary control mode (set the mode as you like freely). Easy to install and operate. Just press slightly the button on the remote, you can control universal DC/AC electrical devices. The RF signal can pass through walls, doors and other barriers. As he said, we will set 4 transmitters and this receiver with same 8-bits code in advance so that they can work together.

Operation modes:

1) Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched (Relay 1~4): Press -> On, other relays Off; Press other button -> Off.

2) Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary (Relay 1~4): Press and hold -> On; Release -> Off.

3) Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle (Relay 1~4): Press -> On; Press again -> Off.

4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Relay 1, 2): Press and hold -> On; Release -> Off.

Control mode Toggle (Relay 3, 4): Press -> On; Press again -> Off.

We will show you how to remote control 4 led lamps from different places.

Wireless remote control 4 DC motors

We recommend the wireless remote control facility here. It is model: S4MC-DC12 & C-4. The receiver (S4MC-DC12) is 4 CH and power supply includes DC 09/12/24V. The transmitter (C-4) remote control receiver and working distance is 100m/300ft theoretically. The facility can remote control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. For example, you can connect 4 motors to receiver and use the wireless transmitter to remote control motor on/off.

Here is the circuit diagram of receiver. You can connect 4 DC motors to B terminal of receiver. Then supply power to receiver. When you press the button of transmitter, the motor will turn on/off by wireless remote control.

The wireless remote control facility has four control modes: toggle, momentary, latched, Momentary+Toggle. We introduce the Momentary+Toggle control mode as the operation:

If you want to set Momentary+Toggle control mode, you should connect jumper 1 and jumper 2.

Control mode Momentary (Channel 1, 2): Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on motor 1 (connect B and C, disconnect A and B)

Release button 1: Turn off motor 1 (disconnect B and C, connect A and B)

Press and hold button 2: Turn on motor 2 (connect B and C, disconnect A and B)

Release button 2: Turn off motor 2 (disconnect B and C, connect A and B)

Control mode Toggle (Channel 3, 4): Press -> On; Press again -> Off.

Press button 3: Turn on motor 3 (connect B and C, disconnect A and B)

Press button 3 again: Turn off motor 3 (disconnect B and C, connect A and B)

Press button 4: Turn on motor 4 (connect B and C, disconnect A and B)

Press button 4 again: Turn off motor 4 (disconnect B and C, connect A and B)

Finally you can also enter into the website and search the wireless remote control facility as following:

Model: 0020283 (S4MC-DC12 & C-4)

Website:

http://www.carymart.com/4-relay-9v-12v-24v-rf-wireless-memory-remote-control-system-p- 1010.html

RF website:

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_246_345&products_id=1010