DC power output wireless kit of remote control one light

The wireless remote control equipment consists of one receiver and one transmitter. It is model: S1XL-DC12 & C-2. The receiver (S1XL-DC12) is 1 CH and output power includes DC 06/09/12/24V. The transmitter (C-2) can remote control receiver and working distance is 100m/300ft theoretically. The equipment can control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances. So you can connect one light to receiver and use the wireless transmitter to remote control light on/off.

receiver & transmitter

Besides, you can connect wires between light and receiver according to the circuit diagram of receiver: connect one light to “A & B” terminal of receiver. Then supply power to receiver. If you press the button of transmitter, the light will turn on/off by wireless remote control.

circuit diagram

L mode is the only one control mode for the wireless remote control kit. You can operate as the processes:

Press button 1: Turn on lamp, terminal A&B output DC power.

Press button 2: Turn off lamp, terminal A&B no output.

Finally if you want to know more something about the wireless remote control equipment, you can also enter into the website and search the product as following:

Model: 0020416 (S1XL-DC12 & C-2)

Website: http://www.carymart.com/1ch-dc-6v-9v-12v-24v-output-remote-control-transmitter-receiver-kit-latched-mode-p-1405.html

RF website: http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_244_263&products_id=1237

How to Remote Control 15 Electric Devices with One Transmitter

We recommend this kit-1 Transmitter & 15 Receivers (15S1UB-AC220 & CP-15). It can be applied in controlling lighting, motors, fans, electrically operated doors / locks / windows / blinds / cars or other electric devices with AC 110~240V or DC 0~28V. Its transmission distance is about 500m/1500ft. It has toggle, momentary and latched working modes. You can connect or disconnect jumper to the receiver to switch those working modes. This kit includes 15 receivers and 1 transmitter, so you can connect 15 electric devices to 15 receivers and control electric devices with only one transmitter.

1_01

We’d like to show how to remote control ac, dc lamps or ac motor.

The contact of relay of each receiver is normally open/ closed. So you need to wire dc lamp to normally open contact B&C and supply DC 12V power to lamp. When you want to remote control ac motors or lamps, you can wire them to receivers as mentioned above. But ac motor and lamps can share the same power supply if you wire as the right picture shown.

circuit

Mode switching and operation:

Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press button 1 again: Turn off Receiver 1 (disconnect B and C, connect A and B)

Press button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Press button 15 again: Turn off Receiver 15 (disconnect B and C, connect A and B)

 

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Release button 1: Turn off Receiver 1 (disconnect B and C, connect A and B)

Press and hold button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Release button 15: Turn off Receiver 15 (disconnect B and C, connect A and B)

 

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, another relay Off; Press another button -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 1 (disconnect B and C, connect A and B)

Press button 15: Turn on Receiver 15 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 15 (disconnect B and C, connect A and B)

Momentary&Toggle Mode Remote Controller for Motor and Lamp

We are about to recommend remote controller which is applied to both motor and lamp. It is DC12V momentary &toggle remote controller (S1F-DC12 & C-3-2), which features in motor forward-reverse capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V. We also design lamp controlling function so that you can control motor and lamp with the same transmitter.

Wireless Switch and Adjustable Time Delay Receiver for DC Light

We can use wall mounted wireless rocker switch and time delay adjustable receiver to control DC lamp.

The wireless rocker switch belongs to remote control calling system, which is the hi-tech electronic product which is integrated wireless communication and computer technology. It is widely applied to restaurants, coffee shops, karaoke rooms, discos, sauna rooms, beer houses, pubs, night clubs, bowling alleys, golf courses, video halls, hotels, hospitals, schools, chain stores ,shops… Time delay adjustable receiver has the range of time adjusting 0 second~99 hours. With normally open& closed terminal contact, we can wire DC or AC device to it. We are going to let them work together to build a new remote control system.

rocker switch& receiver

At first, we should pair up wireless rocker switch and adjustable time delay receiver. Then, we install the rocker switch to wall with screw. Next, we wire DC lamp to receiver. Initial state: A, B= Normally Closed; B, C =Normally open. So DC lamp should be wired to B, C terminals. Supply power to DC lamp and receiver respectively.

1_09

Press buttons of “+” and “-” on the timer, adjust delay time from 0 second to 99 hours. “H” is Hour, “M” is Minute, and “S” is Second.

For example, supposed we set “M 0 1”, it means the delay time is 1 minute.

Press button on the rocker switch, turn on the lamp. After delay time, lamp will turn off by itself. If we want to turn off lamp immediately, press button on the rocker switch again, lamp turns off, no need to wait for delay time.

Integrated Smartphone Wi-Fi Controller for LED Lamp

iOS system is a mobile operating system developed and distributed by Apple Inc. It is extended to support other Apple devices such as iPod Touch, iPad other than iPhone. As we known, Wi-Fi is an advantage local area network, which is received by any Smartphone including Apple device. Now we integrate Wi-Fi networking and device with iOS system to develop a brand new product, Smartphone Wi-Fi Controller.

002

It works under Wi-Fi connection. With 8-channel high-current output (30amp), you can wire at least 8 devices to it. With external antenna for longer range, the theatrical working distance is 2000M (6000ft) in the open air. Actually, we design this controller for 2 Smartphone working systems— 4.6 ~ 6.1 version iOS and 2.1 ~ 4.0 version Android systems. We will illustrate the iOS system controlling lamp here. It must Work on the jailbroken iPhone, iPad, iPod Touch. Where there is Wi-Fi networking, there is this Wi-Fi controller. It Applied in modern agriculture field, smart home, instruments, equipment controlling. Wi-Fi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

Let’s see the procedure. We have Wi-Fi controller, DC LED lamp, iPod, power adaptor.

WF-8-2R iOS material

Wire lamp to OUTPUT 1 and supply power to receiver. Lamp will get power through receiver.

wifi control dc lamp

WF-8-2R iOS wiring

 

After switching on power, wait until power led, ready led and link led turn on. So the Wi-Fi network is connected. After wireless network connection, press the icon of WIFI Controller software installed in advance to turn on it.

WF-8-2R iOS connection

Set up working mode for each channel of relay. Four working modes Toggle, Momentary, Latching and Time Delay are provided.

Set up Toggle control mode: Press the “T” icon of any channel. Choose T (Toggle) control mode.

WF-8-2R iOS shift mode

Press the icon and the color of icon changes to green, the corresponding relay will be on. Lamp is on.

WF-8-2R iOS lamp on

Press the icon again, the relay will be off. Lamp is off.

WF-8-2R iOS lamp off

Set up Time Delay control mode: Press “0s” icon of any channel. Enter the delay time, then press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. For example, if you want 5 seconds delay time, you can set 5 (s).

WF-8-2R iOS time delay setting

Press the icon, lamp is on.

WF-8-2R iOS time delay on

After 5 seconds, the lamp will be off automatically.

WF-8-2R iOS time delay off

Video: