remote control lamp by external jog switches and wireless transmitter

How to Remote Control Lamp By External Jog Switches And Wireless Transmitter

We have a new remote control, you can use external jog switches to control electrical equipment, and electric device can be controlled with a wireless transmitter. Let us know the new product by customer’s question.

Question from customer:

I need the receiver S2PX-AC220 in which there are two manual switches. I can solder external jog switches to the circuit board of the receiver. Can you send me a picture of which connection point the wires should be soldered to?

Answer:

The following picture can meet your requirements. It is easy for you to solder two external jog switches to the connection points of the circuit board of the receiver.

IMG_2678-111111

 

How to control lamp by external jog switches? Please follow steps below.

Step 1: Connect the external jog switches to the manual switches and prepare some gadgets.

At first we need two red wires and two black ones. A red wire and a black one should be connected to manual switch S1 and S2 respectively according to the picture above. Then we can solder the external jog switch to the red and black wire on basis of the following picture.

Preparing some gadgets: lamps, receiver S2PX-AC220 with external magnetic antenna, transmitter C-2, power plug

 

S2PX-AC-ANT2&C-2&点动开关控制灯-材料

 

Step2: Wire the gadgets together according to the picture below.

S2PX-AC-ANT2&C-2&点动开关控制灯

 

Step3: Control the lamps to turn on and off by the external jog switches.

Press external jog switch 1: Turn on lamp 1,
Press external jog switch 1 again: Turn off lamp 1.

Press external jog switch 2: Turn on lamp 2,
Press external jog switch 2 again: Turn off lamp 2.

S2PX-AC-ANT2&C-2&点动开关控制灯-点动1开关     S2PX-AC-ANT2&C-2&点动开关控制灯-点动2开关

Of course, we can remote wirelessly control the lamps by the transmitter C-2. Please look at the picture below.

Press button 1: Turn on lamp 1,
Press button 1 again: Turn off lamp 1.

Press button 2: Turn on lamp 2,
Press button 2 again: Turn off lamp 2.

S2PX-AC-ANT2&C-2&点动开关控制灯-遥控1键开关     S2PX-AC-ANT2&C-2&点动开关控制灯-遥控2键开关