wireless vibrating pager and transmitter

Wireless vibrating pager and remote controller for using to alert someone

Question from customer:

I am looking for a system that would allow my father to alert severely disabled mother when the latter is not in the same room. Maximum range 100 m sought. The button must be easy to use. The receiver must fit in a pocket.

Answer:

We introduce the wireless vibrating pager and remote controller to you according to your requirement. It is model: Z-06 & CP-1. The receiver (Z-06) is a wireless vibrating pager and working distance is 100m. The transmitter (CP-1) is a remote controller. When you press the button of transmitter, it will launch wireless RF signal to receiver and receiver vibrates. Then someone can know something happen. For example, if your mother presses the button of remote controller, your father will feel vibration from wireless vibrating pager and know something happen to your mother.

1_02        1_06

 

 

There are three working modes for the wireless vibrating pager and remote controller: vibration, beep, vibration and beep. You can choose any one of three modes as following operation:

When you press the button of receiver, switch to beep mode from vibration mode:

Press the button of transmitter, the receiver vibrates for 5 seconds.

 

When you press the button of transmitter again, switch to vibration & beep mode:

Press the button of transmitter, the receiver beeps for 5 seconds.

 

When you press the button of transmitter again, switch to vibration mode:

Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.

1_031_06-

Finally you can also enter into the website to know more something about the wireless vibrating pager and remote controller:

Model: Z-06 & CP-1

Website:

Z-06

http://www.carymart.com/433mhz-100m-wireless-vibrative-beep-receiver-with-three-modes-p-1643.html

CP-1

http://www.carymart.com/1-button-radio-remote-controller-cp1-p-229.html