Remote Control Electron Microscope’s Motors

9V Remote Control for Electron Microscope’s Motor

Question from customer:

I use a manual switch to control 4 9V motors of my electron microscope and each motor works in 150ma (0.15a). In addition, only one motor works when I press button of remote control each time. Now I want to remote control them, have you got any suitable remote for me?

Electron microscope:

IMG_8863

Manual Switch of microscope:

IMG_8864

Answer:

We thought this 8 channel rf remote transmitter & receiver is very suitable for you . It can be used to control at most 8 on / off electrical devices. With characteristics of strong anti-interference, reverse power protection and over current protection. Three voltages dc9v, dc12v and dc24v are provided to choose. It is widely applied to control many kinds of lights, electrically operated doors / gates / windows / blinds and so on. It works with 8-button transmitter and their transmitting distance can reach to 500m.

1

This is the wiring diagram.

circuit

Wire each motor to the normally open terminal “B”. According to the diagram, you can do wiring like above. Even though there are 8 working modes in it, you can choose ”Momentary mode” which is applied in motor’s rotation.

Control mode Momentary (Channel 1~8): Press and hold -> On; Release -> Off.

 

Press and hold button 1: Motor 1 rotates in positive direction

Release button 1: Motor 1 stops rotation

Press and hold button 2: Motor 1 rotates in reverse direction

Release button 2: Motor 1 stops rotation

 

Press and hold button 3: Motor 2 rotates in positive direction

Release button 3: Motor2 stops rotation

Press and hold button 4: Motor 2 rotates in reverse direction

Release button 4: Motor 2 stops rotation

 

Press and hold button 5: Motor 3 rotates in positive direction

Release button 5: Motor 3 stops rotation

Press and hold button 6: Motor 3 rotates in reverse direction

Release button 6: Motor 3 stops rotation

 

Press and hold button 7: Motor 4 rotates in positive direction

Release button 7: Motor 4 stops rotation

Press and hold button 8: Motor 4 rotates in reverse direction

Release button 8: Motor 4 stops rotation

 

Only one motor works when you press the corresponding button on the remote.