Remote Control Car Backup Camera

Remote Control Car Backup Camera

Overview:

I would like to turn on/off the wireless reversing camera on my car (12V). What device can you recommend?

car-reversing-camera

Solution:

We recommend this 1 channel 12V universal remote control model (S1U-DC12-ANT1+C-2).

You can wire reversing camera power lines to normally open terminals B&C of receiver. Receiver and reversing camera can share the same power supply (12V) together.

wiring-diagram

This 1CH rf remote control switch operates in toggle, momentary and latched control mode (set the mode as you like freely). And you’d better choose toggle mode or latched mode. It is great for hard to reach lights or other DC/AC electrical devices. With external telescopic antenna, the receiver has farther working range (about 100m).

1_02

Operation:

Setting control mode Toggle: Connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on the reversing camera (connect B and C, disconnect A and B)

Press button 1 again: Turn off the reversing camera (disconnect B and C, connect A and B)

 

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on the reversing camera (connect B and C, disconnect A and B)

Press button 2: Turn off the reversing camera (disconnect B and C, connect A and B)