Memory Function Remote Controller

Remote Control System with Status Restore Function

We recommend this DC power no/nc contact memory function RC system (S1MU-DC06/09/12/24 & C-2). This remote control switch operates in 4 kinds of voltages, including 6V, 9V, 12V and 24V. It can remote control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances actuated by voltage ac 110~240V or DC 0~28V. Its transmission distance is 100m. There are 4 working modes in it. So you can switch working mode by connect and disconnect jumper. With function of memory, if the power is cut off, the relay will return automatically to the previous status after the power is restored.

memory remote controller

We’d like to show the wiring and controlling of ac, dc lamps.

The contact of relay of each receiver is normally open/ closed. So you need to wire ac lamp or dc lamp to normally open contact B&C and supply AC 220V power or dc power to lamp.

wiring diagram


Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.


Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.


Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, another relay Off; Press another button -> Off. | 502: Bad gateway

Error 502 Ray ID: 3f2f6dea96937e75 • 2018-02-26 02:21:10 UTC

Bad gateway








What happened?

The web server reported a bad gateway error.

What can I do?

Please try again in a few minutes.