one to many series remote controller

Remote control 3 receivers with external extend antenna by wireless 12 CH transmitter

We recommend the 12 CH transmitter long range remote control 3 receivers here. It is model: 3S4UB-AC220-ANT2 & CB-12. The wireless remote control device includes one transmitter (CB-12) and three receivers (3S4UB-AC220-ANT2). The transmitter has 12 buttons and can  remote control 3 receivers within 2000m/6000ft theoretically at the same time. The each receiver can connect four appliances. So the transmitter will control appliances on/off. The wireless device remote control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V. For example, you can connect four lamps to each receiver and use the transmitter to remote control lamps on/off.

receiver & transmitterreceiver

Here is the circuit diagram of receiver. You can connect four lamps to B terminal of relays in the receiver. Then supply power to receiver by connecting wires to “L&N” terminal. You press the buttons of transmitter and the lamps will turn on/off by wireless remote control.

circuit diagram

The wireless remote control device has four control modes: toggle, momentary, latched, momentary+toggle. You can choose any one of four control modes. We set toggle mode here. You can operate as the process:

The button 1,2,3,4 remote control receiver 1; button 5,6,7,8 remote control receiver 2; button 9,10,11,12 remote control receiver 3.

 

Press button 1: Turn on lamp 1 of receiver 1 (connect B and C, disconnect A and B)

Press button 1 again: Turn off lamp 1 of receiver 1 (disconnect B and C, connect A and B)

Press button 2: Turn on lamp 2 of receiver 1 (connect B and C, disconnect A and B)

Press button 2 again: Turn off lamp 2 of receiver 1 (disconnect B and C, connect A and B)

Press button 3: Turn on lamp 3 of receiver 1 (connect B and C, disconnect A and B)

Press button 3 again: Turn off lamp 3 of receiver 1 (disconnect B and C, connect A and B)

Press button 4: Turn on lamp 4 of receiver 1 (connect B and C, disconnect A and B)

Press button 4 again: Turn off lamp 4 of receiver 1 (disconnect B and C, connect A and B)

 

Press button 5: Turn on lamp 1 of receiver 2 (connect B and C, disconnect A and B)

Press button 5 again: Turn off lamp 1 of receiver 2 (disconnect B and C, connect A and B)

Press button 6: Turn on lamp 2 of receiver 2 (connect B and C, disconnect A and B)

Press button 6 again: Turn off lamp 2 of receiver 2 (disconnect B and C, connect A and B)

Press button 7: Turn on lamp 3 of receiver 2 (connect B and C, disconnect A and B)

Press button 7 again: Turn off lamp 3 of receiver 2 (disconnect B and C, connect A and B)

Press button 8: Turn on lamp 4 of receiver 2 (connect B and C, disconnect A and B)

Press button 8 again: Turn off lamp 4 of receiver 2 (disconnect B and C, connect A and B)

 

Press button 9: Turn on lamp 1 of receiver 3 (connect B and C, disconnect A and B)

Press button 9 again: Turn off lamp 1 of receiver 3 (disconnect B and C, connect A and B)

Press button 10: Turn on lamp 2 of receiver 3 (connect B and C, disconnect A and B)

Press button 10 again: Turn off lamp 2 of receiver 3 (disconnect B and C, connect A and B)

Press button 11: Turn on lamp 3 of receiver 3 (connect B and C, disconnect A and B)

Press button 11 again: Turn off lamp 3 of receiver 3 (disconnect B and C, connect A and B)

Press button 12: Turn on lamp 4 of receiver 3 (connect B and C, disconnect A and B)

Press button 12 again: Turn off lamp 4 of receiver 3 (disconnect B and C, connect A and B)

 

Finally you can enter into the website and search the wireless remote control device as following:

Model: 0020408 (3S4UB-AC220-ANT2 & CB-12)

 

Website:

http://www.carymart.com/12ch-10a-2000m-long-range-radio-frequency-remote-control-3-receiver-1-transmitter-110v-220v-p-1396.html

 

http://www.ourautomation.com/12ch-10a-2000m-long-range-radio-frequency-remote-control-3-receiver-1-transmitter-110v-220v-p-1396.html