1 channel wireless wall mounted switch of remote control garden light

Wireless Wall Mounted Switch of Remote Control Garden Light

As we known, people usually use wire switch at home or other places. Now here introduces one more convenient wireless remote control switch: it is model S1X-DC12 & HR-1.The equipment includes two parts: the receiver (S1X-DC12) and the transmitter (HR-1, wireless wall mounted switch).







Wireless mounted is best characteristic of the remote control switch. Before we all need to spend much time to mount the switch with wire and the problem is it can’t move .But now we can solve the trouble after using the wireless wall mounted switch of remote control .More important is it can move and stick on anywhere we go.


  It is 1 channel DC 12V power direct output of wireless remote control switch. It can control lights, motors, fans, electrical operated doors/locks/windows/blinds/cars or other appliances. We can turn on/off the appliances with wireless mounted switch from any place within a reliable distance (50m/150ft, theoretically).The wireless RF signal can pass through walls, floors and doors. For example, we want to mount a 12V LED light in our garden. We need to connect wires between house and garden by covering the wires underground before. Now we just need to mount appliance in the garden then stick the wireless wall switch on the garden’s door. We press switch, the RF signal can pass through wall and be received by the appliance. Then we can turn on/off LED light. Of course, we can also mount several LED lights at the same time, because one /several transmitters (wireless wall mounted switch) can control one /several receivers at the same time.


  The wireless wall mounted switch has two working modes: Toggle, Momentary. It just has one button, so the two modes more suitable.

Setting control mode Toggle: Only connect Jumper-2.

Press button: Turn on LED light.

Press button again: Turn off LED light.


Setting control mode Momentary: Only connect Jumper-1.

Press and hold button: Turn on LED light.

Release button: Turn off LED light.


So mount and operate the equipment is all very simple and convenient for us.


Here is the circuit diagram. You can connect DC lamps to “A & B” output terminals of receiver. Then supply power to receiver. You just need to operate as above processes and you can turn on/off LED light by using the wireless wall mounted switch.



If you want to know more something about the wireless wall mounted switch, you can enter into our website and search the product as following:


Model: 0020546 (S1X-DC12 & HR-1)