1 channel wireless wall mounted switch of remote control ceiling fan

Wireless Wall Mounted Switch of Remote Control Ceiling Fan

  Do you still use wire switch to control your ceiling fans or other appliances now? Do you want to have more convenient equipment? Now we can provide it to you: it is model S1X-DC12 & HR-1. The equipment includes two parts: the receiver (S1X-DC12) and the transmitter (HR-1, wireless wall mounted switch).







  Wireless mounted is best characteristic of the remote control switch. You can move and stick it on anywhere you go instead of just fixed in one place like before. So if you use the wireless wall mounted switch with remote control, you don’t need to spend much to mount switch with wire.


  It is 1 channel DC 12V power direct output of wireless remote control switch. It can control lights, motors, fans, electrical operated doors/locks/windows/blinds/cars or other appliances. We can turn on/off the appliances with wireless mounted switch from any place within a reliable distance (50m/150ft, theoretically).The wireless RF signal can pass through walls, floors and doors. Before you need to connect switch and fan with wire if you want to mount a ceiling fan in your house. But now you just need to mount the receiver in the fan, then stick the wireless wall mounted switch on anywhere you want. You press switch, the wireless RF signal can be received by the receiver in the fan through walls, floors and doors. And you can turn on/off the ceiling fan by remote control. Of course, you can also mount several ceiling fans at the same time, because one /several transmitters (wireless wall mounted switch) can control one /several receivers at the same time.


  The wireless wall mounted switch has two working modes: Toggle, Momentary. It just has one button, so the two modes more suitable.

Setting control mode Toggle: Only connect Jumper-2.

Press button: Turn on ceiling fan.

Press button again: Turn off ceiling fan.

Setting control mode Momentary: Only connect Jumper-1.

Press and hold button: Turn on ceiling fan.

Release button: Turn off ceiling fan.


So mount and operate the equipment is all very simple and convenient for you.


  Here is the circuit diagram. You can connect fan to “A & B” output terminals of receiver. Then supply power to receiver. You just need to operate as above processes and you can turn on/off ceiling fan by using the wireless wall mounted switch.




If you want to know more something about the wireless wall mounted switch, you can enter into our website and search the product as following:


Model: 0020546 (S1X-DC12 & HR-1)





manmeds.top | 502: Bad gateway

Error 502 Ray ID: 3f1a76d7063ea627 • 2018-02-23 13:17:15 UTC

Bad gateway








What happened?

The web server reported a bad gateway error.

What can I do?

Please try again in a few minutes.