Wireless Wall Mounted Doorbell Switch with Transmitter of Remote Control Doorbell

We usually mounted a wire switch to control the doorbell before. But now we can wireless remote control doorbell by using the facility. It is model: S1XM-DC12 & C-1. The facility includes three parts: receiver, transmitter and wireless wall mounted doorbell switch. The receiver is S1XM-DC12, the transmitter is C-1, the doorbell switch is DS-W.

remote control

 

 

Transmitter & Receiver            

                                                                                           

doorbell switchdoorbell switch backside

 

Doorbell switch 

 

We can wireless remote control doorbell by connecting one transmitter with two wires to the doorbell switch. Then we need to mount the wireless doorbell switch to wall. After we mount the receiver to the doorbell in the house, we press the switch and the transmitter can launch RF wireless signal. The signal will be received by the receiver in the doorbell and turn on the doorbell by remote control.

Here is the way of connecting the transmitter with remote control to doorbell switch. We just need to connect two wires to the doorbell switch by soldering as following picture:

remote&touch switch connection

  The wireless RF signal can pass through walls, floors and doors. So we can also mount the doorbell switch on other places besides walls. We can turn on/off the doorbell with transmitter by remote control within a reliable distance (100m/300ft theoretically).

  Of course we usually remote control the doorbell by mounting the doorbell switch on the wall like following pictures:

doorbell at door  doorbell at door 2

  Here is the circuit diagram. We can connect the doorbell to “A & B” output terminal in the receiver .Then supply power to the receiver. Because the remote control doorbell switch only has one button, so when we press and hold the button, the doorbell on; release the button, the doorbell off.

circuit

 

The wireless wall mounted doorbell switch is more convenient for using in our living. If you would like to know more something about the remote control doorbell switch, please you enter into our website and search the product as following:

 

Model: 0020414 (S1XM-DC12 & C-1); 0031167(DS-W)

 

Website:

http://www.carymart.com/

 

0031167(DS-W)

http://www.carymart.com/fashion-design-white-crystal-glass-panel-doorbell-switch-p-1351.html

 

0020414 (S1XM-DC12 & C-1)

http://www.carymart.com/dc-6v-9v-12v-24-output-wireless-remote-control-momentary-switch-1-channel-p-1404.html

Momentary 6V 1 Channel Remote Controller for Doorbell

Question from customer:

I want to install a single channel remote to control my doorbell within the range of 150m. The old 6V doorbell was broken and I don’t want to repair the wires of doorbell. Ordinary wireless doorbell cannot be used because it doesn’t reach the distance I really want. I have an idea that a transmitter is connected to the doorbell button and relay in receiver is connected to doorbell. The only problem is the control range of remote need to reach about 150m. Would you like to recommend some favorable products?

doorbell 1

Answer:

We recommend the 6V one channel 2000m receiver(S1U-DC06-ANT2) and long range transmitter (CB-1). Working voltage range of receiver is 6V. With normally open and close terminal, the voltage of the device being controlled is AC110~240V or DC0~28V. So it can be applied in 6V doorbell. Usually, you don’t have to supply additional power to doorbell because it can get 6V power from powered receiver when you connect them to the 6V power supply together. And the most significant is that it has extended external antenna which makes its control range up to 2000m (6000ft). You will be satisfied with this product.

remote control

According to your requirement, you can connect the button of the bell to the transmitter by two wires. Then connect the bell to the relay in the receiver.

circuit

Setting control mode Momentary: Connect Jumper-1.

When you press the button of the bell, RF signal will be sent out from transmitter to receiver. The receiver receives to turn on the relay, then the doorbell rings. Release the button, the doorbell stops ringing.