August 15, 2014 – Remote Control Everything

We recommend the wireless remote control facility here. It is model: S6C-AC220 & CV-6. The receiver (S6C-AC220) is 6 CH and supply power is AC 100~240V. The transmitter (CV-6) remote control distance is 500m/1500ft theoretically. The wireless facility can remote control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. So you can connect 6 appliances to receiver and use the wireless transmitter to remote control appliances on/off.

Here is the circuit diagram of receiver. You can connect 6 lamps to B terminal in the receiver. Then supply power to receiver by connecting live wire to “L” terminal and neutral wire to “N” terminal. When you press the button of transmitter, the lamps will turn on/off by wireless remote control.

The wireless remote control facility has 6 control modes: toggle, momentary, latched, momentary+toggle, momentary+latched. We introduce toggle mode here. Of course you can also operate according to other control modes.

Operation as the toggle mode processes:

Press button 1: Turn on lamp 1 (connect B and C, disconnect A and B)

Press button 1 again: Turn off lamp 1 (disconnect B and C, connect A and B)

Press button 2: Turn on lamp 2 (connect B and C, disconnect A and B)

Press button 2 again: Turn off lamp 2 (disconnect B and C, connect A and B)

Press button 3: Turn on lamp 3 (connect B and C, disconnect A and B)

Press button 3 again: Turn off lamp 3 (disconnect B and C, connect A and B)

Press button 4: Turn on lamp 4 (connect B and C, disconnect A and B)

Press button 4 again: Turn off lamp 4 (disconnect B and C, connect A and B)

Press button 5: Turn on lamp 5 (connect B and C, disconnect A and B)

Press button 5 again: Turn off lamp 5 (disconnect B and C, connect A and B)

Press button 6: Turn on lamp 6 (connect B and C, disconnect A and B)

Press button 6 again: Turn off lamp 6 (disconnect B and C, connect A and B)

Finally if you want to know more something about the wireless remote control facility, you can also enter into the website and search the product as following:

Model: 0020452 (S6C-AC220 & CV-6)

Website:

http://www.carymart.com/6-channel-500m-ac-220v-rf-remote-control-set-transmitter-receiver-p-1450.html

RF website:

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=361_352&products_id=1275

We recommend this DC power no/nc contact memory function RC system (S1MU-DC06/09/12/24 & C-2). This remote control switch operates in 4 kinds of voltages, including 6V, 9V, 12V and 24V. It can remote control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances actuated by voltage ac 110~240V or DC 0~28V. Its transmission distance is 100m. There are 4 working modes in it. So you can switch working mode by connect and disconnect jumper. With function of memory, if the power is cut off, the relay will return automatically to the previous status after the power is restored.

We’d like to show the wiring and controlling of ac, dc lamps.

The contact of relay of each receiver is normally open/ closed. So you need to wire ac lamp or dc lamp to normally open contact B&C and supply AC 220V power or dc power to lamp.

Operation:

Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, another relay Off; Press another button -> Off.

Day: August 15, 2014

Wireless remote control set with 6 relays

Remote Control System with Status Restore Function