Wall Mounting 1 Button Wireless Calling Button / Transmitter Remote Controls LED Lamp

Question from customer:

I live on a boat and have terrible access to my wiring. I really want to replace my lights and have their three switches centralized in a new location. So I have the 12v power supply to each light. I’m wondering if I can have a wireless receiver behind each light that are switched independently from three separate switches mounted on a wall. I’d like to use standard light switch fixtures as well if possible.

Can you recommend me anything that solves this situation?


We recommend this wall mounting 1 button wireless calling button (433MHz)and 1 channel 12VDC wireless receiver (S1X-DC12). One calling button and a receiver can be paired to be a remote control kit.


Wireless calling button is the hi-tech electronic product which is integrated wireless communication and computer technology. When there is a calling from a calling button, its paired receiver will be activated to control device which is wired to receiver.

It is widely applied to restaurants, coffee shops, karaoke rooms, discos, sauna rooms, beer houses, pubs, night clubs, bowling alleys, golf courses, video halls, hotels, hospitals, schools, chain stores ,shops…

Wireless calling button simply install to wall by screws. There is no need wiring from switch to lamp. Your light can be wired to the receiver and do not need supply additional power to light because it can get power from receiver. And you have three lights so you need three calling buttons and receivers.

We will show you the instruction.

We have wireless calling button, wireless receiver, LED lamp and power adaptor.


The wiring is very simple.


After switching on power, press calling button to turn on LED lamp.

lamp on

Press calling button again to turn off LED lamp.

lamp off



Leave a Reply