Voltage Input Triggered Remote Control Design to Applying to Device Control another Device

Q:

I need a device that can connect to an existing 110V light switch. When the light switch is ON, the device sends a wireless signal to another 110V outlet to turn on a light that is plugged into that outlet. When the 110V light switch is OFF, the device turns the outlet off.

 

A:

This device, which is pointed out above, is more likely our brand new product, CB-2V. The characteristic of the transmitter CB-2V will be triggered by DC power 5~28V input.

According the requirement from customer, we will try to give a demonstration of our 1 channel 2000M voltage input triggered rf remote control set to show how it works.

Material preparation:

1 x transmitter, CB-2V

1 x receiver, S1X-AC220-ANT2

2 x lights

1 x adaptor

1 x power strip

Power supply

S1X-AC-ANT2+CB-2V-material preparation copy

Let’s see the wiring procedure.

Step 1

We connect the transmitter to the 12V adaptor and plug lamp 2 to power strip.

Plug the transmitter to power strip.

Step 2

We connect lamp 1 to the receiver and connect the plug to the receiver.

S1X-AC-ANT2+CB-2V-wiring

When pressing the button on the power strip, the lamp is on and the transmitter CB-2V sends a wireless signal “ON” to the receiver S1X-AC220-ANT2, it will make another lamp on.

S1X-AC-ANT2+CB-2V-operation 1-lamp on

When pressing the button on the power strip again, the lamp is off and transmitter CB-2V sends a wireless signal “OFF” to the receiver S1X-AC220-ANT2, it turns another lamp off.

S1X-AC-ANT2+CB-2V-operation 2-lamp off

http://www.youtube.com/watch?v=mqDJ2RqElQQ&feature=youtu.be

Online shop: www.carymart.com

Leave a Reply