An easy way to control a winch remotely

We usually use winch to help us to hoist heavy stuff to higher place or drop to lower place. For example, farmers always store the grain in the warehouse in every harvest season. But the warehouse sometimes is an attic. They usually have to hoist grain bag to the attic by themselves in the past. Actually, that is energy-consuming working. It is too difficult for aged farmers to hoist those heavy bags of grains now. So they want to know if there is an easier way to hoist grain.

The rf momentary motor remote  controller is strongly recommended here. The major characteristic of this receiver is to make the motor in the winch rotate in positive and reversal direction. That is to say, the rope of winch will be stretched out and drawn back by wireless remote controller. The transmitter is also easy to use.

Here are transmitter and receiver.

1_01

The following is the application circuit of receiver.

1_06

From the wiring picture, the wires from the winch are connected to the receiver. We hook up the bag, pressing and holding button ▲ on transmitter. With the motor of winch working continuously in the “UP” direction, the rope is drawn back and the bag is hoisted; When the bag is lifted to the attic, release button ▲, the motor of winch stops working. After putting away the grains bag, we press and hold button ▼ on transmitter, the motor works continuously in the “DOWN” direction , the rope is stretched out and then it reaches the ground.

S1FM-DC&winch2

 

Online shop: www.carymart.com/

Momentary Motor Remote Control Trailer and Winch

Question:

Our company manufactures a series of trailers that use 12vdc hydraulics to tilt and lower the decks. We also often install electric winches on trailers and are looking for a momentary remote to operate the trailer and the 12vdc electric winch.

Answer:

We think momentary dc 2 channel motor remote controller model of 0020481 (S2PF-DC12 & CV-6) is suitable for you. It can be used to control 2 12vdc motors rotating forward and reversal. Maximum working current is up to 30 Amp. This motor remote controller is applicable to control motors of heavy duty electrical devices and equipment, such as your electric trailer and winch.

Wiring diagram is as follow. Connect wires of 12vdc power supply to terminals “+” and “-”; connect wires of trailer motor to terminals “A1” and “A2”; connect wires of winch motor to terminals “B1” and “B2”.

Setting momentary control mode: connect Jumper-1.

Press and hold button 1: trailer motor rotates in positive direction.
Release button 1: trailer motor stops.
Press and hold button 3: trailer motor rotates in reversal direction.
Release button 3: trailer motor stops.

Press and hold button 2: winch motor rotates in positive direction.
Release button 2: winch motor stops.
Press and hold button 4: winch motor rotates in reversal direction.
Release button 4: winch motor stops.

Online shop: www.carymart.com/