One Receiver and 15 Transmitters- One-to-Many Remote Control System

We’d like to recommend one-to-many series remote control system: 15 channel remote control system (S15C-DC12 & 15C-1), which includes 15 transmitters and 1 receiver. The transmitter’s transmission distance is 100/300ft theoretically. This wireless gadget can remote control lights, TVs, motors, fans, cameras, video signals, audio signals, electrical operated doors/locks/windows/blinds/cars or other appliances with voltage of AC 110~240V or DC0~28V.

1_011_03

We’d like to show how to wire lamps and remote control lamps with this system.

The initial status is A,B normally open; B,C normally closed. We wire lamps to A&B terminals of each relay one by one. Next, we supply power to receiver. (Supply AC or DC power).

1_07

There are 15 working modes in it. We will try to show you the operation.

1) Learning Momentary control mode: When the receiver is in the status of LEARNING, press transmitter 1.

Control mode Momentary (Channel 1~15): Press and hold -> On; Release -> Off.

Press and hold transmitter 1: Turn on relay 1 (connect A and B, disconnect B and C)

Release transmitter 1: Turn off relay 1 (disconnect A and B, connect B and C)

Press and hold transmitter 15: Turn on relay 15 (connect A and B, disconnect B and C)

Release transmitter 15: Turn off relay 15 (disconnect A and B, connect B and C)

2) Learning Latched control mode: When the receiver is in the status of LEARNING, press transmitter 2.

Control mode Latched (Channel 1~15): Press -> On, other relays Off; Press other button -> Off.

Press transmitter 1: Turn on relay 1 (connect A and B, disconnect B and C)

Turn off other relays (disconnect A and B, connect B and C)

Press transmitter 15: Turn on relay 15 (connect A and B, disconnect B and C)

Turn off other relays (disconnect A and B, connect B and C)

3) Learning Toggle control mode: When the receiver is in the status of LEARNING, press transmitter 3.

Control mode Toggle (Channel 1~15): Press -> On; Press again -> Off.

Press transmitter 1: Turn on relay 1 (connect A and B, disconnect B and C)

Press transmitter 1 again: Turn off relay 1 (disconnect A and B, connect B and C)

Press transmitter 15: Turn on relay 12 (connect A and B, disconnect B and C)

Press transmitter 15 again: Turn off relay 12 (disconnect A and B, connect B and C)

4) Learning Momentary (Channel 1~8) + Latched (Channel 9~15) control mode: When the receiver is in the status of LEARNING, press transmitter 4.

5) Learning Toggle (Channel 1~8)) + Momentary (Channel 9~15) control mode: When the receiver is in the status of LEARNING, press transmitter 5l.

6) Learning Latched (Channel 1~8) + Toggle (Channel 9~15) control mode: When the receiver is in the status of LEARNING, press transmitter 6.

7) Learning Momentary (Channel 1~13) + Latched (Channel 14~15) control mode: When the receiver is in the status of LEARNING, press transmitter 7.

8) Learning Toggle (Channel 1~13) + Momentary (Channel 14~15) control mode: When the receiver is in the status of LEARNING, press transmitter 8.

9) Learning Toggle (Channel 1~5) + Momentary (Channel 6~10) + Latched (Channel 11~15) control mode: When the receiver is in the status of LEARNING, press transmitter 9.

10) Learning Momentary (Channel 1~5) + Latched (Channel 6~10) + Momentary (Channel 11~15) control mode: When the receiver is in the status of LEARNING, press transmitter 10.

11) Learning Toggle (Channel 1~2) + Momentary (Channel 3~10) + Latched (Channel 11~15) control mode: When the receiver is in the status of LEARNING, press transmitter 11.

12) Learning Momentary (Channel 1~2) + Toggle (Channel 3~10) + Latched (Channel 11~15) control mode: When the receiver is in the status of LEARNING, press transmitter 12.

13) Learning Latched (Channel 1~2) + Momentary (Channel 3~10) + Toggle (Channel 11~15) control mode: When the receiver is in the status of LEARNING, press transmitter 13.

14) Learning Toggle (Channel 1~2) + Latched (Channel 3~9) + Momentary (Channel 10~15) control mode: When the receiver is in the status of LEARNING, press transmitter 14.

15) Learning Toggle (Channel 1~13) + All On / Off (Channel 14/15): When the receiver is in the status of LEARNING, press butt transmitter on 15.

Press transmitter 14: Turn on all 15 relays

Press transmitter 15: Turn off all 15 relays

One Transmitter Remote Control 4 Devices Actutated by 24 V and 240V Version

Question from customer:

Whether we can get the receivers with different voltage versions? For example 2 piece of 24 volt and 2 piece of 240 volt.

Answer:

Yes, it is possible. We recommend those two kinds of receivers—for 24V version, it is 24V DC input receiver (S2UB-DC24). For 240V version, it is 100V~240V input receiver (S2U-AC220). Both of them have two relays on the PCB. So there are four channels totally for your devices. They can pair up with long range transmitter (CB-4).

remote-controller

It can control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with voltage AC 110~240V or DC 0~28V. Owing to normally open& closed contact, you should add additional power supply to your devices besides your receivers. But you can do as following wiring method to save power supply adaptors. Wire devices (lamps) to B terminals of each relay, using wires to connect devices to output terminals of each receiver. For dc input receiver, we supply dc 24v power; for ac input receiver, we supply ac 240v power.

circuit

There are toggle, momentary, latched and momentary+toggle modes. You want to remote control 4 devices, so you’d better choose toggle or momentary mode or toggle+momentary mode.

Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button A: Turn on relay 1 of Receiver 1 (connect B and C, disconnect A and B)

Press button A again: Turn off relay 1 of Receiver 1 (disconnect B and C, connect A and B)

Press button D: Turn on relay 2 of Receiver 2 (connect B and C, disconnect A and B)

Press button D again: Turn off relay 2 of Receiver 2 (disconnect B and C, connect A and B)

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button A: Turn on relay 1 of Receiver 1 (connect B and C, disconnect A and B)

Release button A: Turn off relay 1 of Receiver 1 (disconnect B and C, connect A and B)

Press and hold button D: Turn on relay 2 of Receiver 2 (connect B and C, disconnect A and B)

Release button D: Turn off relay 2 of Receiver 2 (disconnect B and C, connect A and B)

Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Channel 1 of Receiver 1, 2): Press and hold -> On; Release -> Off.

Press and hold button A: Turn on relay 1 of Receiver 1 (connect B and C, disconnect A and B)

Release button A: Turn off relay 1 of Receiver 1 (disconnect B and C, connect A and B)

Press and hold button B: Turn on relay 1 of Receiver 2 (connect B and C, disconnect A and B)

Release button B: Turn off relay1 of Receiver 2 (disconnect B and C, connect A and B)

Control mode Toggle (Channel 2 of Receiver 1, 2): Press -> On; Press again -> Off.

Press button C: Turn on relay 2 of Receiver 1 (connect B and C, disconnect A and B)

Press button C again: Turn off relay 2 of Receiver 1 (disconnect B and C, connect A and B)

Press button D: Turn on relay 2 of Receiver 2 (connect B and C, disconnect A and B)

Press button D again: Turn off relay 2 of Receiver 2 (disconnect B and C, connect A and B)

How to Remote Control 24 Lamps with One Transmitter

99-channel Transmitter pairs up with 24 receivers to build a remote control kit (24S1XCB-AC220 & CP-99). It can controls lights, fans, motors, electrically actuated doors/ locks/ windows/ rolling blinds/ cars or other appliance with AC 110~240V. The transmitter adopts singlechip technology to build million of code and has LCD display screen. One transmitter can work with 99 receivers simultaneously.

remote controller-our automation1_10

This kind of remote controller aims at controlling 24 AC Lamps. We will show you the procedure.

circuit-our automation

circuit-diagram

Step 1

Wire each lamp to terminals 1 &5 of each receiver. And supply power to each receiver.

Step 2

The coding type is learning code, so receiver should learn from transmitter at first.

1) Press and hold the button of receiver about 2 seconds until signal LED flashes; then release the button, at this time the receiver enters into status of LEARNING.

2) Press any number button on the transmitter to select a number from 01 to 99, then press button “T” or “M” to send signal. If signal LED immediately turns off, it means learning is successful.

3) The receiver can learn only one channel of the transmitter. So learning code must be one by one till the last one.

Step 3

Press any number button to select a number from 01 to 99 by combination of the number 0~9, then press button “T” (Toggle) or “M” (Momentary) to send signal. LCD screen will displays numbers at the same time, and LCD screen will turn off after 15 seconds if there is no any operation.

Toggle Mode Operation: If you want to send signal of the 24 channel, you can press “2″, then press “4″, next press button “T”, the signal is sent immediately; when you press the button “T” again, the signal will be sent again.

Momentary Mode Operation: If you want to send signal of the 24 channel, you can press “2″, then press “4″, next press and hold button “M”, the signal is continuously sent; when you release the button “M”, the signal will stop.

So we want to remote control 24 AC lamps, we choose Toggle mode.

Press 1+T, send signal to receiver, turn on lamp 1, press T again, turn off lamp 1. (Waiting for LCD screen being off, you can continue next operation every time.)

Press 2+4+T, send signal to receiver, turn on lamp 24, press T again, turn off lamp 24.

1 Channel RF Remote Controller Switch AC Lamp Off/On

This is the one-to-many series remote controller. The 1 channel rf receiver is normally open &closed contact, you can wire lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC 110~240V or DC 0~28V. The transmitter is 12-button and its transmitter is 500m/1500ft. That transmitter can remote control 12 lamps at most when it pairs up with 12 receivers. Here you will see an example to remote control one ac lamp with this kind of remote controller.

Here is the material.

material

Next step is the wiring.

wiring

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2

Press button 1, turn on lamp.

button 1 light on

Press other button, turn off lamp.

button 2 light off

Video

How to Use One Transmitter to Remote Control 30 Receivers

Question from Customers:

I’d like to remote control my LED decoration lights. Can I use 30 similar receivers with 1 transmitter working on 6v battery to operate low voltage LED decoration lights, in one on off operation?

Answer:

Yes, we recommend this single channel dc 6V toggle 100m rf remote control kit—the receivers S1T-DC06 and the transmitter C-1.

1

We will set 30 receivers and this transmitter with same 8-bits code so that they can work together. These receivers S1T-DC06 can work on 6V battery. The control mode is toggle mode which is fixed in advance. Toggle mode is the only working mode in this remote control kit. The maximum working current of one receiver is 10amp and remote control distance is 100m (300ft).

Here comes the wiring.

Initial state: A and B terminals are normally closed; B and C terminals are normally open. We connect light to B&C terminals. And the receiver must be wired to 6V power supply. Light can share the same power supply with receiver if you do wiring follow that wiring diagram.

circuit

You can connect 30 lights to 30 receivers one by one. Press button, turn on all lights; press button again, turn off all lights.