Mobile Phone WiFi Controller – Page 2 – Remote Control Everything

Handset Wi-Fi Controller for AC Motor

When we want to control electric devices, we always try to make the wiring, connection and operation easy. If you want electric device can get power supply through the remote controller instead of supplying another power, we’d like to introduce the cell phone Wi-Fi controller with DC or AC voltage output to you.

It supports 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iSO software system. But here we introduce the use under android system. It is applied in modern agriculture field, smart home, instruments, equipment control. Wi-Fi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

Here is the controlling procedure of AC motor for your information. The material is Wi-Fi controller, mobile phone, AC motor and power adaptor.

Connect the motor to the output terminals of WIFI controller as the wiring diagram shown.

Switch on the power of WIFI controller. Wait until power led, ready led and link led turn on. So the Wi-Fi network is connected. After wireless network connection, press the icon of WIFI Controller software to turn it.

Set up working mode for each channel of relay. Four working modes Toggle, Momentary, Latching and Time Delay are provided.

Set up Momentary control mode: Click the ▼ icon of any channel. Choose M (Momentary) control mode.

Press and hold button 1, the motor is positive rotation. Release button 1, motor stops.

Press and hold button 2, the motor is reverse rotation. Release button 2, motor stops.

Video:

30amp Output Cell phone Wi-Fi Controller for AC Lamp

Wi-Fi is a sort of short-area wireless networking, which is available in home or other public places, such as canteens, shopping malls, parks, theatres, cinemas. It can allow computers, Smartphones and other gadgets to access to internet without a wired connection. Our product is combined Smartphone with remote receiver via Wi-Fi networking to make Smartphone Wi-Fi Controller.

This kind of Wi-Fi controller is 30amp high current and ac or dc voltage direct output, that is to say, you don’t need to connect the controlled devices to its own power source. They will get through this receiver. It supports 2.1~4.0 version Android Software system and 4.6~6.1 version iOS software system. Here, we will show you how to use this Wi-Fi controller control AC lamp under Android system.

Let’s go through the procedure. Here is the material.

Wiring is fairly simple. You can wire ac lamp to the Output 1 as the wiring diagram shown. There are 8 Output terminals, so you can wire at least 8 devices.

After finishing wiring, we turn on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate. After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 4 working modes in it, which includes Toggle, momentary, latched and time delay modes. Toggle mode is used to control lights.

Press button 1, turn on lamp.

Press button 1 again, turn off lamp.

Video:

WIFI Remote Control Home Theatre Slide Panels

Home theatre refers to home entertainment systems that seek to reproduce a movie theater experience and mood, with the help of video and audio equipment in or outside a private home. Keep from mositure or dust, we usually use slide panels to protect them, you can use our utility Smartphone WIFI Controller to open or close slide panels. WLAN WIFI is extensively used nowadays, so we combine remote controller with WIFI network to make useful sort of product. If you use this WIFI controller, only to use your cell phone as a transmitter, you can control your device within a reliable distance with WLAN.

It is applied in smart home, instruments, equipment control and modern agriculture field. WIFI remote controller controls many kinds of lights, motors, fans, electric doors/windows, aircraft, cars components, toys, rolling blinds, water pumps, winches or other electric devices with voltage AC110~240V or DC0~28V by its normally open and closed terminals.

This WIFI controller supports both 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iOS software system. And we’d like introduce how to control DC motor under the iOS system. This controller works on the jailbroken iPhone, iPad, iPod Touch. Let’s see the procedure.

Here is the wiring diagram and picture. Motor is connected to common terminal ”B”. And normally open terminal“C” is connected to positive wire. Normally closed terminal “A” is connected to negative wire.

After finishing wiring, we switch on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate.

After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use momentary for motor controlling.

Press and hold button 1, it is the motor’s positive rotation. Slide panels open. Release button 1, it is motor’s stop.

Press and hold button 2, it is the motor’s reverse rotation. Slide panels closed. Release button 2, it is motor’s stop.

Video:

How to Remote Control Droplight with Mobile Phone

One of our customers said that he installed droplight on the wall of stairs. He wanted to remote control droplight but sometimes it is not convenient to him to have a transmitter.

We recommend him our Smartphone WIFI remote controller WF-8-1R (iOS system). It supports 4.6 ~ 6.1 version iOS software system. That is to say, if you use our WIFI remote control and install our WIFI software in your mobile phone. Your mobile phone will be a transmitter which can work with WIFI controller in pairs to control electric devices.

It is applied in modern agriculture field, smart home, instruments, equipment control. WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

The following is the presentation.

They are WIFI controller, iPod, AC lamp and 12V adaptor.

Wiring:

Connect AC lamp to the output terminals (B&C) of WIFI controller.

Software installation:

Install the WIFI Controller software to your iPhone, iPad or iPod Touch by iTunes.

Note: Your iPhone, iPad or iPod Touch must be jailbroken.

Switch on the power of WIFI controller. Wait until power led and wifi start-up led turn on. After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use toggle or latched for lighting controlling. And there is “Time Delay” mode in it. Here is the presentation of “Toggle” and ”Time Delay” mode to control AC lamp.

Toggle Controlling:

Set up Toggle control mode: Press the “T” icon of channel 1. Choose T (Toggle) control mode.

Press button 1 and the color of button 1 icon changes to green, AC lamp will be on. Press the icon again, the lamp will be off.

Time Delay Controlling:

Set up Time Delay control mode: Press “0s” icon of channel 1. Enter the delay time, then Press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. We set delay time 5 seconds.

Press button 1 to turn on the lamp.

After 5 seconds, the lamp is off by itself.

Time Delay mode is much better for you to control your bracket light. If you set the delay time in advance, you don’t have to switch off it again because it is off automatically when delay time is up.

Video:

8 Channel Power Output WIFI Controller Switches LED Strip On and Off

A brand new Smartphone WIFI controller (android system) supports 2.1 ~ 4.0 version Android software system. It is still WIFI interface and it controls devices via WIFI connection. The most remarkable characteristic is that AC and DC power direct output, which means that when you supply ac power, output terminals are ac power output; when you supply dc power, output terminals are dc power output. It is applied in modern agriculture field, smart home, instruments, equipment control. WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

We will show you the WIFI controlling of LED strip and we have to prepare the following material.

1×Smartphone WIFI controller

1×mobile phone (android system)

1×LED lamp

2×power adaptor

Some lines

This is the WIFI controlling of LED strip’s wiring. Look at the little picture in the following picture. We connect the DC 12V adaptor to the ”Power Input ” terminal. On the other hand, output terminal will output 12V to the LED strip. If there is AC power input, the output terminals will output AC power to the controlled devices.

After simple wiring, we switch on the power. The “power” LED light is on. With the shining of the WiFi “Ready” LED light, we turn on WiFi of mobile phone. The WiFi “Link” LED light is on. We press the control software installed in the mobile phone and press the “Connect”.