Remote Control Lights – Page 2 – Remote Control Everything

Latched Mode Remote Control Switch for Lamp Controlling

When you want to remote control one more AC devices, you may think about 2 channel remote receiver. This kind of Latching 2 channel remote switch (S2L-AC110~240V + C-1) may be suitable for you. It is activated by AC110V~240V power supply, so being controlled devices will get power from powered receiver. The maximum current output is 3 ampere. The Coding type of receiver is learning code. You can remote control any electric devices within 100M (No obstacles).

Look at the following wiring diagram. We try to introduce 2 lamps controlling of this kind. First, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Second, we connect the lamp 1 to the terminal “5” and the neutral wire. Third, we continue to connect the lamp 2 to the terminal “4” and the neutral wire.

Latching mode is the only working mode of this remote. So we can do the following operation. 1) Press button C: Turn on the lamp 1, turn off the lamp 2.

2) Press button B: Turn on the lamp 2, turn off the lamp 1.

3) Press button A: Turn off the lamp 1 and the lamp 2.

You can remote control any AC electric appliances other than lamps. It is very convenient to you because you don’t have to supply any power to controlled appliances.

100M Remote Controller Switch Lamp On and Off

The 1 channel Latched mode RF remote control operates in AC110V ~220V and 315/433MHz. Through retrofitting, this kind of remote control made a little changes compared with the original remote. Two kinds of receiver style, one is AC 110V (AC 100~120V), widely used in US, Canada…; the other is AC220V (AC 200~240V), used in UK, France…. The Coding type of receiver is learning code. Maximum working current for each channel is 3 ampere instead of 4 ampere of original one. The working distance is 100M.

You can control on/off, open/close of universal electrical devices. Applications include gate remote control, motor remote control, garage door remote control, light remote control, etc. We will take ac light remote controlling for an example. Look at the following wiring diagram. From the interior analogue circuit, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. And then connect the lamp to the terminal “5” and the neutral wire.

Latched mode is the only working mode of it. As regards the latched mode, it is motivated by relay group. (Latched (Press button 1-> On; Press button 2 -> Off)) So we prepare a 2-button transmitter for you to remote control it. All you need to do is just press slightly the button on the remote. You press button 1 to turn on lamp; press button 2 to turn off lamp.

6000ft AC Direct Output Remote Switch for Electric Appliance

Question from customer:

I want to turn an appliance off and on in a room in my house 120ft from the room with the transmitter. Does the appliance plug into the receiver and the receiver plug into an outlet?

Answer:

We recommend 6000ft long range ac direct output remote controller (S1X-AC220-ANT2 & CB-2). The remarkable feature of this remote controller is that 220V power direct output, that is to say, appliance plugs into receiver directly and gets 220V power from powered receiver( receiver is plugged into an outlet.) The maximum current of its relay is 10 ampere which is suitable for some appliances. The working distance is longer than any other remote, which is about 6000ft in the open field. 6000ft is long enough for your remote controlling.

At first, it is the wiring. Look at the following wiring diagram. For instance, we remote control a lamp. We just need to wire lamp to “L&N” terminals of “OUT”. That is very easy. And supply ac 220V to receiver. Then lamp can get power from powered receiver.

And this receiver works with two-button long range transmitter. There are three working modes in it. They are Toggle, Momentary, and Latched modes. If there is only a device, we recommend setting latched mode.

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press button 1: turn on the lamp.

Press button 2: Turn off the lamp.

100M 2CH Toggle Remote Control 2 AC Lamps

When you want to remote control one more AC devices, you may think about 2 channel remote receiver. This kind of toggle 2 channel remote switch (S2T-AC110~240V + C-1) may be suitable for you. It is activated by AC110V~240V power supply. The maximum current output is 3 ampere. The Coding type of receiver is learning code. You can remote control any electric devices within 100M(No obstacles).

Look at the following wiring diagram (1). We try to introduce 2 lamps controlling of this kind. First, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Second, we connect the lamp 1 to the terminal “5” and the neutral wire. Third, we continue to connect the lamp 2 to the terminal “4” and the neutral wire.

Toggle mode is the only working mode of this remote. So we can do the following operation. 1) Press button 1, turn on the lamp 1; Press button 1 again, turn off the lamp 1. 2) Press button 2, turn on the lamp 2; Press button 2 again, turn off the lamp 2.

You can remote control any AC electric appliances other than lamps. It is very convenient to you because you don’t have to supply any power to controlled appliances which will get power from powered receiver.

Toggle AC 110V~220V Remote Control for Lamp

The 1 channel RF remote control operates in AC110V ~220V and 315/433MHz. Through retrofitting, this kind of remote control made a little changes compared with the original remote. Two kinds of receiver style, one is AC 110V (AC 100~120V), widely used in US, Canada…; the other is AC220V (AC 200~240V), used in UK, France…. The Coding type of receiver is learning code. Maximum working current for each channel is 3 ampere. The working distance is 100M.

Toggle mode is the only working mode of it. (Toggle (Press -> On; Press again -> Off)) All you need to do is just press slightly the button on the remote. You press button to turn on lamp; press button again to turn off lamp.