Remote Control AC Motor – Page 2 – Remote Control Everything

AC Motors are Controlled by DC Remote

Nowadays, motors are found in applications as diverse as industrial fans, pump, household appliances, tools and other devices, which can be powered by direct current (DC) or alternating current (AC) source. Of course, we can also remote control motors of those devices above to switch on or off of devices, even the forward-reverse rotation. When you want to control many motors with one transmitter, we think multi-channel remote control is very favorable.

8 channel dc triggered RF remote transmitter & receiver operates in 8 working modes. It can be used to control at most 8 on / off electrical devices. With characteristics of strong anti-interference, reverse power protection and over current protection. Three voltages dc9v, dc12v and dc24v are provided to choose. It is widely applied to control every kind of lights, electrically operated doors / gates / windows / blinds and so on.

Would you like know how to control 2 ac motors with an 8-channel dc triggered remote? Look at the following show.

First off all, we prepare material.

1×8CH rf receiver

1×8-button transmitter

2×AC motor

Some lines

Power supply 220V

Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C.

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 2, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 3, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4 , motor 2rotates in reversal direction. Release the button, motor stops.

Operational Video:

10amp AC Remote Switch Controls AC Motors’ Rotation

This 6 channel AC triggered remote control is easy to install and use. It is capable of controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. As for 6 channels, it can control six devices simultaneously at most. With 500m working distance, you can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance. The wireless RF signal can pass through walls, floors, doors or other obstacles. Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada… and voltage of AC220V (200V~240V), used in UK, France…

We will try to show you how to control positive and reversal rotation of two AC motors with 6 channel AC remote module. We will use four of all relays. Let’s see the following material.

1×6CH rf receiver

1×6-button transmitter

2×AC motor

Some lines

Power supply 220V

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.

Operational Video:

12V Remote Control for 2 AC Motors

Electric motors are everywhere, even computers have electric motors to power its cooling fans and hard disks. But, today we will talk about remote controlling AC motor by DC remote controller. Then this 6CH RF wireless remote control switch operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete six operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc. Its transmitting distance can reach 500m (1500ft). Three voltages include dc9v, dc12v and dc24v.

We will try to show you how to control positive and reversal rotation of two AC motors with this remote module. We will use four of all relays. Let’s see the following material.

1×6CH rf receiver

1×6-button transmitter

2×AC motor

Some lines

Power supply

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.

Operational Video:

4-Channel Remote Control for 2 AC Motors 2000M

When you control motors of awnings, electric rolling blinds, winches, projector screens, linear actuator, pumps and other devices far away. And you just want to stay with leisure in you couch to remote control devices mentioned above. Then long range wireless remote control system is the solution.

4-channel remote control model of (S4U-DC12-ANT2+CB-4). It includes long distance remote transmitter and receiver with magnetic mount antenna. The working distance is up to 2000m (6000ft) in the open field. Transmitting signal can pass through walls, floors, doors or other obstacles. You can control the motor rotate in positive and reversal direction from any place within reliable distance.

Next, we will prepare a show to tell you how to control 2 AC motors’ rotation in two directions.

Let’s see the following material.

1×4CH rf long range receiver

1×4-button long distance transmitter

2×AC motor

Some lines

Power supply

Here is the wiring diagram. This is the wiring for AC motors. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C. Surely, the receiver must be supplied DC 12V power.

There are 4 working modes. They are toggle, momentary, latched and toggle+momentary modes.

Momentary mode is usually set to control motor.

Press and hold button A, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button D, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button B, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button C, motor 2 rotates in reversal direction. Release the button, motor stops.

Operational Video:

4 Channel DC RF Wireless Transmitter Receiver for 2 AC Motors

This 4CH RF wireless remote controller operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete four operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc.