New Product – Remote Control Everything

Wireless Wall-Mounted Switch Remote Control Kit for AC Lamp

We made a remote control kit which consists of a wall-mounted switch and a remote receiver (S1X-AC220&HR-1).

When we use ordinary switch to switch home appliances off and on, we should do some wiring for home appliances, some time it is very complicated and time- consuming. Our RF wireless wall mounted switch looks like universal switch from appearance, but it is wireless and operate by RF signal that can pass through walls, floors and doors. It is can be simply affix to any place you want by double faced adhesive tape.

Through RF signal, you don’t have to wire between switch and appliances. Wall-mounted switch works with remote receiver to remote control ac lamp.

Here is the wiring diagram.

Wire ac lamp to OUTPUT of receiver. And add power supply to receiver. This kind of receiver is designed for AC output terminals so that lamp can get power from output terminals of receiver directly.

Setting different control modes (We usually set toggle for lamp controlling.)

Setting control mode Toggle: Only connect Jumper-2.

Press button: Turn on the relay, terminal OUT outputs AC power, turn on lamp.

Press button again: Turn off the relay, terminal OUT no output, turn off lamp.

How to Substitute Remote Controller for DPDT Switch to Control AC Motor

A DPDT switch has six connections, but since polarity reversal is very common usage of DPDT switches. DPDT switch can be wired to motor to realize positive and reversal rotation. Recently, we develop a kind of 4 channel wireless remote controller kit (S4PA-AC220+CV-4-2) which aims at replace DPDT switch to remote control other appliances, lights, motors, fans, electrically operated doors / locks / windows / blinds / cars…

The following video will show you how to substitute remote controller kit for DPDT switch.

Wireless Calling System in Karaoke Rooms

Question from customer:

I want to run business of karaoke rooms. So I need a set to be installed in karaoke rooms and reception desk. It is better to install calling gadget to karaoke room and receiver to reception desk. When there is customer in karaoke room calling, he can using calling gadget to call our stall to help him. Do you have any suggestion?

Answer:

We recommend wireless calling system to you. It includes calling transmitter and receiver host. You can pair up any kinds of calling transmitter with receiver host according to your need. The receiver host is 999-channel, so you can pair up 999 transmitters with a 999-channel receiver host at most. This kit is multi-mode. It is better to choose “Normal mode”. You can choose 200m 2 buttons free sticker wireless calling button and a 999- channel receiver host and stick calling button on the wall of karaoke room.

Here we can show you this controlling project procedure.

We prepare a receiver host, 2-button calling transmitters, manager remote and 9V power supply for receiver host.

There are three steps to pair up transmitters and receiver host.

Working mode setting:

After switching on power, press and hold button 1 of manager remote for 2sec to enter setting menu, press button “3″ or “4″ to choose Cd8, press button 1 again to enter submenu of Cd8, press button “3″ or “4″ to choose “0″ (Mode 0: Normal mode), press button “2″ to turn back to setting menu.

Calling button pairing:

Press button “3″ or “4″ to choose Cd7, press button 1 again to enter submenu of Cd7, press button “3″ or “4″ to choose “001″, Press any button of transmitter (except “Cancel”), the speaker will sound “successful registration” and 4 LED indicators will flicker. The display screen turn to next number “002″ automatically. Then you can continue to do the next pairing up the follow-up transmitter. Press button “2″ to turn back to setting menu.

Key switch setting:

Press button “1″ to enter submenu of Cd6 to choose “2″(4-key mode). Press button “2″ twice to turn back to standby status.

(After all the settings are finished, please power off the host and restart.)

Operation:

Press “Call”, screen reads “001” and sounds “Dingdong+No.1 call”.

Press “Cancel”, cancel previous call and turn back to standby status.

Video:

https://www.youtube.com/watch?v=tfGhpxOdbzk&feature=youtu.be

200M 3 Buttons Free Sticker Wireless Calling Button & Receiver Host Operation

Question from customer:

Recently, I am ready to manager a large new restaurant. I want to divide it into different areas so as to be convenient to customers and waiters. So I need some calling system to be used in restaurant for customers and waiters. The transmitter can be used by customer. The receiver can be put to reception desk. When there is customer calling from any area, he can press the button to notify the waiter and customer will get help as soon as possible.

Answer:

We recommend wireless calling system. They include a 999-channel receiver host. You can choose this 3-button calling transmitter. That is to say, you can pair up 999 transmitters with a 999-channel receiver host at most. This kit is multi-mode. According to your requirement, you can choose “Area mode”.

We prepare a receiver host, 3-button calling transmitters, manager remote and 9V power supply for receiver host.

There are three steps to pair up transmitters and receiver host.

Working mode setting:

After switching on power, press and hold button 1 of manager remote for 2sec to enter setting menu, press button “3″ or “4″ to choose Cd8, press button 1 again to enter submenu of Cd8, press button “3″ or “4″ to choose “2″ (Mode 2: Area mode), press button “2″ to turn back to setting menu.

Calling button pairing:

Press button “3″ or “4″ to choose Cd7, press button 1 again to enter submenu of Cd7, press button “3″ or “4″ to choose “601″, Press any button of transmitter (except “Cancel”), the speaker will sound “successful registration” and 4 LED indicators will flicker. The display screen turn to next number “012″ automatically. Then you can continue to do the next pairing up the follow-up transmitter. Press button “2″ to turn back to setting menu.

Key switch setting:

Press button “1″ to enter submenu of Cd6 to choose “5″(4-key mode). Press button “2″ twice to turn back to standby status.

(After all the settings are finished, please power off the host and restart.)

Operation:

Press “Call”, screen reads “601” and sound “Dingdong+6 area+No.01 call”.

Press “Checkout”, screen reads “601” and sound “Dingdong+6 area+No.01 checkout”

Press “Cancel”, cancel previous call and turn back to standby status.

Video:

https://www.youtube.com/watch?v=tnnBBsbWLNE&feature=youtu.be

Wireless Calling Transmitters&Receiver Host for Hospital

Question from customer:

I manage a small new hospital. Now I want a remote control system which includes six remote transmitters and one 6-channel receiver. Each remote controller is put on every desk beside bed. And the receiver is put in the nurse station. When there is patient calling, he can press the button to notify the nurse station in time.

Answer:

We recommend wireless calling system. They include a 999-channel receiver host and more than one transmitter at your option. You can choose six calling buttons That is to say, you can pair up 999 transmitters with a 999-channel receiver host at most. This kit is multi-mode. We’d like to make a presentation of hospital mode.

We prepare a receiver host, 6 calling transmitters, manager remote and 9V power supply for receiver host.

There are three steps to pair up transmitters and receiver host.

Working mode setting:

After switching on power, press and hold button 1 of manager remote for 2sec to enter setting menu, press button “3″ or “4″ to choose Cd8, press button 1 again to enter submenu of Cd8, press button “3″ or “4″ to choose “4″ (Mode 4: Hospital mode), press button “2″ to turn back to setting menu.

Calling button pairing:

Press button “3″ or “4″ to choose Cd7, press button 1 again to enter submenu of Cd7, press button “3″ or “4″ to choose “011″, Press button of transmitter 1, the speaker will sound “successful registration” and 4 LED indicators will flicker. The display screen turn to next number “012″ automatically. Then you can continue to do the next pairing up from transmitter 2 to transmitter 6. Press button “2″ to turn back to setting menu.

Key switch setting:

Press button “1″ to enter submenu of Cd6 to choose “2″(2-key mode). Press button “2″ twice to turn back to standby status.

(After all the settings are finished, please power off the host and restart.)

Operation:

Press button on the transmitter 1, screen reads “011” and sounds “Dingdong+ Room 1+No.1 Call”

Press button on the transmitter 2, screen reads “012” and sounds “Dingdong+ Room 1+No.2 Call”

…

Press button on the transmitter 6 screen reads “016” and sounds “Dingdong+ Room 1+No.6 Call”

Video:

https://www.youtube.com/watch?v=M4_Rk_8I29A&feature=youtu.be