12 channel wireless transmitter remote control 6 receivers with AC & DC voltage

In general, one transmitter controls one receiver. But now if you want to wireless remote control several receivers by one transmitter, you can consider the equipment.

It is model: 6S2UB-AC220+1CV-12. The receiver (6S2UB-AC220) has two relays in it and the transmitter (1CV-12) has 12 buttons on it. You can wireless remote control 6 receivers by one transmitter. You press one of 12 buttons on the transmitter, then one of 6 receivers can be controlled. Besides, the transmitter can control 6 receivers with different voltage. For example, you can choose 3 receivers of DC 24 volt and 3 receivers of AC220 volt. But the DC 24 V receiver’s model is S2UB-DC24. So you need to choose two different model receivers with different voltage.

1_09  1_02-

1_02

 

 

The equipment can control lights, motors, fans, electrically operated doors/ locks/ windows/ blinds/cars or other appliances with voltage AC 110~240V or DC 0~28V. You can connect one appliance to the receiver, then press the button of the transmitter and you can turn on/off the appliance by wireless remote control.

The wireless remote control equipment has four control modes: Toggle, Momentary, Latched, Momentary and Toggle. You can set any one of four modes according to usage details of the product’s specification. Here introduce the toggle mode to you as following processes:

Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on relay 1 of Receiver 1 (connect B and C, disconnect A and B)
Press button 1 again: Turn off relay 1 of Receiver 1 (disconnect B and C, connect A and B)
Press button 2: Turn on relay 2 of Receiver 1 (connect B and C, disconnect A and B)
Press button 2 again: Turn off relay 2 of Receiver 1 (disconnect B and C, connect A and B)

Press button 11: Turn on relay 1 of Receiver 6 (connect B and C, disconnect A and B)
Press button 11 again: Turn off relay 1 of Receiver 6 (disconnect B and C, connect A and B)
Press button 12: Turn on relay 2 of Receiver 6 (connect B and C, disconnect A and B)
Press button 12 again: Turn off relay 2 of Receiver 6 (disconnect B and C, connect A and B)

1_03-  1_01-

Here is the circuit diagram of the receiver with AC voltage and DC voltage. You can connect two AC lamps to the terminal in every AC220V receiver and connect two DC lamps to the “B & C” terminal in every DC 24V receiver. Then supply power to 6 receivers. When you press the buttons, you can turn on/off these AC or DC lamps by using one transmitter wireless remote control.

1_06-  1_06

 

Finally, you can also know more details about the wireless remote control equipment through enter into our website and search the product as following:

 

Model: 0020356 (6S2UB-AC220 & 1CV-12)

0020409 (6S2UB-DC24 & 1CV-12)

 

Website:

http://www.carymart.com/

 

0020356 (6S2UB-AC220 & 1CV-12)

http://www.carymart.com/2-channel-110v-220v-ac-rf-remote-control-system-1-transmitter-6-receiver-p-1503.html

 

0020409 (6S2UB-DC24 & 1CV-12)

http://www.carymart.com/12channel-dc-radio-frequency-wireless-on-off-switch-1-transmitter-6-receiver-p-1391.html