time delayed – Remote Control Everything

Customized Time Delay 6V Remote Controller for Lamp

This 1 channel dc RF remote control switch features in controlling relay off time delay. Delay time can be customized according to actual requirement. It is widely applied to control lights, motors, fans, electrically operated doors / locks / windows / blinds or other electrical devices. It is activated in 6V power supply. You need provide us with the delay time you want when ordering. E.g. delay time: 20 seconds or 1 hour or 20 minutes… The delay time is not adjustable freely. Its working current is 10ampere and working distance is 100m (300ft).

It has normally open and closed contact. It controls various lights, fans or motors with voltage AC110~240V or DC0~28V. Here is the alternate current device wiring diagram and the wiring diagram of direct current device which not share the same power supply with receiver.

Of course, if you want to remote control direct current device which shares the same power supply with receiver, you need to do some different wiring from above wiring. Suppose that you want to remote control 6V lamp. So you don’t have to supply additional power for led lamp because led lamp will get power from powered receiver as long as you wire lamp to the receiver.

Here is the wiring procedure of 6V lamp which shares the same battery with receiver. The red wire from the lamp is connected to the C terminal of the receiver and black wire from the lamp is connected to the negative electrode of the power supply. The positive wire of the supply power is connected to B terminal and positive electrode of the receiver. The negative electrode of the power supply of power supply and receiver are connected together.

We set its delay time 20seconds.

Press button 1: Turn on the lamp. After 20seconds, turn off the lamp by itself.

During the delay time, press button 2: Turn off the lamp straightway.

Manual Switch Turn on LED On the Receiver Remotely and Turn off it after delay time

Question from customer:

The transmitter is to function as a switch to the receiver activated by supplying a 12v DC

current to the transmitter (switching it on).

The receiver then permits a 12v DC current to be supplied to a specific appliance. When the transmitter is shut off the receiver should have a 15 to 20 second delay before stopping supply to its appliance which will then shut down.

Answer:

We recommend this kind of controlling unit —12V time delayed receiver and low voltage triggered transmitter (S1X-DC12-ANT2+CB-2V) to you. It is applied for device controlling another device. The remarkable characteristic of the transmitter CB-2V will be triggered by DC power 5~28V input. That’s to say, when you give voltage of 5~28V to the transmitter, transmitter will be on. We add external extended antenna which makes transmitting distance up to 2000m. We design time delayed function program for this receiver which can realize that the controlled appliance on the receiver will be off after 15~20 seconds when you shut off transmitter. We can preset time according to you requirement.

According to the picture above, he wants the transmitter can be activated by manual switch and turn receiver on/off when the current in that circuit is on/off. First, the transmitter is supposed to be connected to power supply and that manual switch. Second, designated appliance should be connected to receiver. In addition, you don’t have to supply power to your appliance because appliance will get power through powered receiver.

Let’s see practical use. Here is the transmitter and manual switch wiring.

We switch on the manual switch and the transmitter will send an “ON” signal to the receiver. The receiver receives the signal to instruct the light to turn on. We switch off the manual switch and the transmitter will send an “OFF” signal to the receiver. Owning to the time delayed program, the receiver won’t give response to transmitter. After 15~20 seconds, the receiver will instruct the light to turn off. (The delay time is preset according to your requirement.)

Turn on Hot Water Circulator and Make it off Automatically

Question from customer:

I want to use one device to turn on a hot-water circulator in my home for 15 minutes&then have it automatically turn off. I live in a 2 story wood home&the hot-water circulator is in the basement-maybe a distance of about 30 ft away through drywall&wood flooring. Will it work over this distance? Would I need to order a telescopic antenna?

Answer:

We think this product may be suitable for you– 1 channel ac delayed remote unit (0020483 S1DA-AC220-ANT2+CB-2). This kind of remote unit is with time delay timer, which you can adjust time according to your requirement. With external extend magnetic antenna, working distance of transmitter and receiver will reach 2000m/6000ft (theoretically).So you don’t have to order telescopic antenna.

Wiring program is as follow:

We connect delayed remote unit to circulator pump. The receiver is relay output (normally open and normally closed). Power supply for the receiver and the water pump are different. That means it will not cause electromagnetic interference during water pump operation.

Operation:

Press big button: Turn on relay (connect B and C, disconnect A and B). After delay time: Turn off relay by itself (disconnect B and C, connect A and B). Press small button: Turn off relay immediately, no need to wait for delay time.

Press buttons of “＋” and “－” on the timer, adjust delay time from 0 second to 99 hours. “H” is Hour, “M” is Minute, and “S” is Second. As your requirement, you can set “M 1 5”, it means the delay time is 15 minutes. After working for 15 minutes, it will be off automatically. Then the circulator pump stops pumping.