Overview:
“I am trying to set up a system with two 4-channel AC receivers and two remotes. What I’d like to do is have 4 lights hooked up to each receiver: (A,B,C,D,) on one receiver and (a,b,c,d) on the second. I would like Remote 1 to turn on/off lights A and a at the same time and lights B and b at the same time. I would like remote 2 to turn on/off lights C and c at the same time and D and d at the same time.”
Solution:
Yes, we recommend two AC power output 4 channel remote receivers (S4X-AC220) and two single-button transmitters (C-1) and set them to work according to your request.
For the receivers, they work at AC 110V/220V. Lights can be wired to relay output terminals and do not need supply additional power. For the remotes, C-1 has only one button. You can set toggle mode. (Press button, turn on device; press button again, turn off device)
Wiring is as the following picture shown.
When you press the button on the remote 1, it will turn on four lights A and a, B and b at the same time.
When you press the button on the remote 1 again, it will turn off four lights A and a, B and b at the same time.
When you press the button on the remote 2, it will turn on four lights C and c, D and d at the same time.
When you press the button on the remote 2 again, it will turn off four lights C and c, D and d at the same time.
Follow