4-Channel Remote Control for 2 AC Motors 2000M

When you control motors of awnings, electric rolling blinds, winches, projector screens, linear actuator, pumps and other devices far away. And you just want to stay with leisure in you  couch to remote control devices mentioned above. Then long range wireless remote control system is the solution.

1

2jpg

4-channel remote control model of (S4U-DC12-ANT2+CB-4). It includes long distance remote transmitter and receiver with magnetic mount antenna. The working distance is up to 2000m (6000ft) in the open field. Transmitting signal can pass through walls, floors, doors or other obstacles. You can control the motor rotate in positive and reversal direction from any place within reliable distance.

Next, we will prepare a show to tell you how to control 2 AC motors’ rotation in two directions.

Let’s see the following material.

1×4CH rf long range receiver

1×4-button long distance transmitter

2×AC motor

Some lines

Power supply

S4U-DC-ANT2&CB-4 material

Here is the wiring diagram. This is the wiring for AC motors. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C. Surely, the receiver must be supplied DC 12V power.

circuit

S4U-DC-ANT2&CB-4 wiring

There are 4 working modes. They are toggle, momentary, latched and toggle+momentary modes.

Momentary mode is usually set to control motor.

Press and hold button A, motor 1 rotates in positive direction. Release the button, motor stops.

S4U-DC-ANT2&CB-4 button A positive rotation

Press and hold button D, motor 1 rotates in reversal direction. Release the button, motor stops.

S4U-DC-ANT2&CB-4 button D reversal rotation

Press and hold button B, motor 2 rotates in positive direction. Release the button, motor stops.

S4U-DC-ANT2&CB-4 button B positive rotation

Press and hold button C, motor 2 rotates in reversal direction. Release the button, motor stops.

S4U-DC-ANT2&CB-4 button C reversal rotation

Operational Video:

AC Triggered Remote Controller Controls AC Motor

This 2 Channel RF AC Remote Controller is driven by AC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for DC/AC electric devices which are hard to reach or far away from switch. It is widely used for lamps, doors, garage doors, motors and so on. Working voltage range of relay is AC 110~240V or DC 0~28V. The Maximum working current of each channel is 10amp. Sometimes, it’s not ideal and convenient to get someone to go back and forth to turn this device on/off, so remote control is your better choice. AC power supply driven remote controller can also control AC motor.

ac remote control

We will try to show you how to control positive and reversal rotation of an AC motor with this remote module. Let’s see the following material.

1×2CH RF AC receiver

1×2-button transmitter

1×AC motor

Power supply

S2U-AC220+C-2 material

Here is the wiring. There is difference with DC power supply activated remote control. Terminals L&N is supposed to connect to a plug which is inserted into a power strip with AC power supply.

S2U-AC220+C-2 wiring

We usually set “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, the motor rotates in positive direction. Release the button, motor stops.

S2U-AC220+C-2 positive rotation

Press and hold button 2, the motor rotates in reversal direction. Release the button, motor stops.

S2U-AC220+C-2 reversal rotation

Short Video:

 

AC Motor is Driven By 2CH RF DC Remote Controller

This Multi-mode RF DC remote control kit is activated by DC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for lights or other DC/AC electric devices which are hard to reach or far away from switch. This 2 channel remote control kit can help you complete two operations at the same time. It is widely used for lights, gates, garage doors, motors and so on.

We will try to show you how to control positive and reversal rotation of an AC motor with this remote module. Let’s see the following material.

1×2CH rf receiver

1×2-button transmitter

1×AC motor

Power supply

Here is the wiring.

We usually set “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, the motor rotates in positive direction. Release the button, motor stops.

Press and hold button 2, the motor rotates in reversal direction. Release the button, motor stops.

Long Range Control 4 LED Lamps—On to Many Series System

Question from customer:

I am looking for a long range (1000m theoretically) RF control. The transmitter can be 4 buttons.  The receivers should be 12V DC models with 2 channels each and a remote antenna for each receiver.

Our answer:

We recommend 2 channel one to many remote control kit—S2UB-DC12+CB-4. The receiver is designed for one-transmitter-many-receivers system. There are two channels for each receiver. You can use 2 receivers with transmitter CV-4 or CB-4. For the transmitter, we recommend CB-4 to you because the working distance of this transmitter can be 1000m when it pairs with the receiver. As your requirement, you want to add a remote antenna for each receiver. Certainly, you can choose external antennas for them (see the following pictures). With the extended external antennas, the transmitting distance will reach about 2000m in the open air. This kit is also a multi-mode remote control which includes four working modes, toggle, momentary, latched and momentary+toggle.

 

 

We should prepare two receivers, one transmitter, 4 lamps, and 12V power supply.

This is the wiring diagram. According to the left side diagram, two led lamps are both connected to common terminals B of two relays and using wires to connect normally open terminals C of two relays. Then, two lamps is supplied 12 V power supply. On the other hand, we should offer power supply to the receiver. Do the same procedure for another receiver.

 

Press button A, turn on lamp 1; Press button A again, turn off lamp 1.

Press button B, turn on lamp 2; Press button B again, turn off lamp 2.

Press button C, turn on lamp 3; Press button C again, turn off lamp 3.

Press button D, turn on lamp 4; Press button D again, turn off lamp 4.

 

 

How to Remote Control 4 LED Spotlights of Truck Wirelessly

Question from customer:

I am looking for a wireless control that I can use to 12V 4 LED work spotlights on my small truck. I want to know if it can work. Do you have any recommendation for which wireless remotes may be the best for the task at hand?

4 spotlights

 

Answer to the question:

We think this product may be you want—dc multi-mode distant control (0020382 S4U-DC12& C-4). It includes remote transmitter and receiver. This kind of remote control has 4 working modes. You can choose any working mode according to your requirement. In addition, RF transmitting signal can pass through walls, trees as well as other barriers. The transmitting distance is about 100m (300ft). The maximum working current is 10 A for each relay.

4 channels remote controller

You can wire 4 LED work spotlights to the receiver as the following application circuit shown.

application circuit

 

Press button 1 to 4 to control corresponding LED work spotlights on the truck.

truck