long range – Page 3 – Remote Control Everything

Manual Switch on/off to Remote Control LED On the Receiver

Question from customer:

I want a remote controlling unit that the transmitter is to function as a switch to the receiver activated by supplying a 12V DC current to the transmitter (switch it on). The receiver then permits a 12V DC current to be supplied to a designated appliance. When the transmitter is shut off the receiver will shut down.

Answer:

Maybe this kind of controlling unit —12V power Input RF remote control system (S1XL-DC12-ANT2+CB-2V) is suitable for you. It is applied for device controlling another device. The characteristic of the transmitter CB-2V will be triggered by DC power 5~28V input. We add external extended antenna which makes transmitting distance up to 2000m.

According to the picture above, he wants the transmitter can be activated by manual switch and turn receiver on/off when the current in that circuit is on/off. First, the transmitter is supposed to be connected to power supply and that manual switch. Second, designated appliance should be connected to receiver.

We prepare a demonstration for this practical use.

We switch on the manual switch and the transmitter will send an “ON” signal to the receiver. The receiver receives the signal to instruct the light to turn on. We switch off the manual switch and the transmitter will send an “OFF” signal to the receiver. The receiver receives the signal to instruct the light to turn off.

How to Remote Control Dust Catcher

Question from customer:

I want to remote control a motor of dust catcher. It is 1400W, 220V and 6A. I wonder if you have any favorable suggestion for me ?

Answer:

Our suggestion is that you can choose our 1 channel high power ac voltage output long distance remote control kit (S1PX-AC220-ANT2 & CB-2). It is very convenient to you because you don’t have to supply any power for controlled device. Controlled device will get power through receiver when receiver is power on. The maximum current of this kit is 30amp. So it is more than your requirement.

Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.

Here is the wiring diagram for your reference.

From the inside structure of dust catcher above, we know that electric motor of dust catcher is connected to OUTPUT L&N terminals. You can set latched working mode. Press big button, motor begins to work. The fan drives rotating brush to absorb dust from intake port to dust bag. You can start to vacuum rooms. Press small button, motor stops working. Vacuum cleaner stops vacuuming. Through this remote control, we can remote control vacuum cleaner on and off.

One Transmitter Remote Control 6 Water Scooters

Question from customer:

I would like to find a solution to control 6 water scooters (12 V). The idea is that from the beach, I am able to shut down the switch of a user that is getting wild or getting to close to danger. So the longest the control distance is much better.

Answer:

We recommend six 12VDC direct power output receivers (S1XB-DC12-ANT2) with the long distance remote (CB-6). Input power and output power of receiver are same as dc 12v. So it is easy for wiring. The receiver can use the water scooters’s battery to operate and controlled water scooters also can get power through receiver. The usage is also very simple. There are 3 working modes setting in the remote control. They are toggle, momentary and latched. But as for you, you have to use toggle mode. Press button, turn on device; Press button again, turn off device.

Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.

Controlling 6 water scooters, you need 6 receivers. Wire each water scooter’s motor to each receiver as the following picture shown.

When any of water scooters is getting wild or getting to close to danger, you can press any button to stop any of them to prevent from accidents. What’s more, it is the long range remote control which can help you control water scooters long distance.

AC 24V Irrigation System Remote Controlling(8 Zones)

Question from customer:

Hello, I’m hoping you can assist me with product selection. What I’m hoping I can do is use one of your long range remote control systems to control the zones in an irrigation controller. The irrigation controller and irrigation zones operate on 24VAC.

I think that your product S8CA-DC12-ANT2+CB-8 would work for my needs if the relays were 24V AC instead of 120V AC. Attached is a diagram of how I’m envisioning it all working.

Answer:

8 Channel long range remote control is designed to be normally open and close connection. So all relays in this receiver can work at 24VAC. We add external extended antenna in the receiver in order to extend the range of remote controlling. It is estimated that the working distance of remote reach 2000M in the open filed.

There is 8 channel for your irrigation zones. According to your diagram, you can wire the irrigation zones and receiver as follow.

We supply receiver with other power so that no interference will generate between remote control and irrigation controller.

There are 8 working modes. You can choose any of them as you want. You can use one transmitter to open and close irrigation zones remotely.

DC 12V Remote Control Switches AC 220V Triggered Modem

Question from customer:

I want to use your system to remote control turn on / off the power of the modem. I go from my office on the third floor of our home to the basement in order to turn off and disconnect the power to the modem. Then after a few minutes I reverse the process and reestablish the power to the modem and turn the modem on. The modem is power by an AC Adaptor (INPUT = 120-240V OUTPUT = 12V ).

Answer:

We recommend the model of 1 channel DC long range remote control kit (S1X-DC12-ANT2+1CB-2) to you. It can wireless control electric devices and is easy to install. With direct power output, it means that you don’t need to supply power to the controlled device. It is capable of controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. We add external extended antenna to it. The antenna can extend the controlling range to 2000M. So you can rest assured that signal can get through any obstacles to reach modem at your home.

As for your modem is powered by ac power, so you should connect the output of your AC Adaptor (12V) to two terminals + and – of this receiver, then connect two terminals A and B to your modem, then you can use our remote CB-2 to turn on / off the power of the modem.

You can set “Latched Mode”.

Press big button, turn on the modem.

Press small button, turn off the modem.