dc motor – Page 2 – Remote Control Everything

Android Smart Cell phone WIFI Controller for DC Motor Operation with DC or AC Output

In daily life, small electric motor is used in our house. It is dc-activated and is applied in rolling blind, household aquarium air pump or skylight. Those motors can be remote controlled. That will very carefree and leisurely.

Sometimes, controlled devices must be supplied power other than remote controller. If you want electric device can get power supply through the remote controller instead of supplying another power, we’d like to introduce the Power Output mobile phone Wi-Fi controller to you.

It supports 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iSO software system. But here we introduce the use under android system. It has 8 channels. It is applied in modern agriculture field, smart home, instruments, equipment control. Wi-Fi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

Here is the controlling procedure of DC motor for your information. The material is Wi-Fi controller, mobile phone, DC motor and power adaptor.

Connect the motor to the output terminals of WIFI controller as the wiring diagram shown.

Switch on the power of WIFI controller. Wait until power led, ready led and link led turn on. So the Wi-Fi network is connected. After wireless network connection, press the icon of WIFI Controller software to turn it.

Set up working mode for each channel of relay. Four working modes Toggle, Momentary, Latching and Time Delay are provided.

Set up Momentary control mode: Click the ▼ icon of any channel. Choose M (Momentary) control mode.

Press and hold button 1, the motor is positive rotation. Release button 1, motor stops.

Press and hold button 2, the motor is reverse rotation. Release button 2, motor stops.

Video:

WIFI Remote Control Home Theatre Slide Panels

Home theatre refers to home entertainment systems that seek to reproduce a movie theater experience and mood, with the help of video and audio equipment in or outside a private home. Keep from mositure or dust, we usually use slide panels to protect them, you can use our utility Smartphone WIFI Controller to open or close slide panels. WLAN WIFI is extensively used nowadays, so we combine remote controller with WIFI network to make useful sort of product. If you use this WIFI controller, only to use your cell phone as a transmitter, you can control your device within a reliable distance with WLAN.

It is applied in smart home, instruments, equipment control and modern agriculture field. WIFI remote controller controls many kinds of lights, motors, fans, electric doors/windows, aircraft, cars components, toys, rolling blinds, water pumps, winches or other electric devices with voltage AC110~240V or DC0~28V by its normally open and closed terminals.

This WIFI controller supports both 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iOS software system. And we’d like introduce how to control DC motor under the iOS system. This controller works on the jailbroken iPhone, iPad, iPod Touch. Let’s see the procedure.

Here is the wiring diagram and picture. Motor is connected to common terminal ”B”. And normally open terminal“C” is connected to positive wire. Normally closed terminal “A” is connected to negative wire.

After finishing wiring, we switch on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate.

After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use momentary for motor controlling.

Press and hold button 1, it is the motor’s positive rotation. Slide panels open. Release button 1, it is motor’s stop.

Press and hold button 2, it is the motor’s reverse rotation. Slide panels closed. Release button 2, it is motor’s stop.

Video:

How to Control Opening Roof and Water Pumps together

Question from customer:

I have a project to install 1 linear dc actuator to control my opening roof and 2 small water pumps. So I need to control from a remote. Both pumps need a remote switch for either on or off; 1 actuator needs a remote switch to up and down.

Answer:

We recommend you 2 motorized remote receiver (S2U-DC12) and 4 button transmitter (CV-4). 2 receivers are connected to linear actuator and water pumps’ motor respectively. You can use one transmitter to remote control them easily. This kind of remote can control Lights, Motors, Fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The working distance is about 500m.

We have made a presentation to show you how to install and operate.

We prepare the following material.

2×2 channel receiver(S2U-DC12)

1×4-button transmitter(CV-4)

1×linear actuator motor

2×dc motor

DC 12V power supplies

Some lines

Here is the wiring for linear actuator.

Here is the wiring for dc motor.

One receiver is connected to the linear actuator, the other is connected to 2 dc motors.

Operation:

We set momentary mode for linear actuator controlling and toggle mode for small motor because they only need to be switched on and off. It won’t generate interference for each other, even though we use the same transmitter to control 2 receivers.

Switch on power.

Press and hold button 1, the linear actuator moves forward(stretch out). Release button, it stops moving.

Press and hold button 2, the linear actuator moves backward(draw back). Release button, it stops moving.

In a word, press button 1 and button 2 can make the linear actuator to reciprocating movement in a straight line. The opening roof can be open or close through its reciprocating movement.

Press button 3, turn on motor 1. Press button 3 again, turn off motor 1.

Press button 4, turn on motor 2. Press button 3 again, turn off motor 2.

Video:

Time Delay Adjustable Remote for DC Motor

Reversing motor can be applied to conveyors, awnings, winches, electrically operated doors / windows / blinds or other electrical devices. To make the motor rotate in positive and reversal direction, we try to use this kind 2 channels adjustable time delay remote control kit to control dc motor.

Firstly we prepare:

1 x 2 channel delay time adjustable receiver (S2DA-DC12)

1 x 4-button transmitter(C-4)

2 x dc 12v power supply

Some lines

Secondly, see the wiring images below; C is normally open terminal; A normally closed terminal and B common terminal. Connect terminal C to the positive and connect terminal A to the negative. Terminal B is supposed to be connected to the motor.