How to change an ordinary portable socket to an RF remote control portable socket

Long time ago, infrared remote controlling system has appeared and now it is still widely used in our daily life. For instance, using infrared remote controller to control TV set, air-conditioner, light, shutter, door and so on.

Now, I believe that you may hear something about remote control socket which uses the infrared to send signal to turn on or off the socket so that it can supply or cut off power to devices. That is an innovative idea of the use of infrared. But infrared remote controlling has its defects. The major defect is a point and click operation system. You have to have the remote control in the line of site of devices themselves. There is no exception with infrared remote control socket. You may still have to find the infrared received terminal on the socket and aim at it with transmitter like you use any of infrared control gadgets. If you go to another place which is far away from the controlled appliance, you cannot do that because of poor signal blocked by door, wall or something else.

But the rf remote control system can help you to solve this problem that it can penetrate non-transparent objects and fixed barriers to transmit signal. That is to say, it can transmit signal through door, wall or in a long range. We may feel free and convenient when using this system.

How to change an ordinary portable socket to an RF remote control portable socket on earth? We can offer a little control gadget to refit your ordinary socket.

First, we need the following gadget.

picture1

 

 

Then, we should prepare a socket, a plug and a lamp and power supply other than the transmitter and receiver.

picture2

The wiring processing is very simple.

Step 1, we connect the plug wires to the input terminal of the receiver.

picture3

Step 2, the wires from the socket should be connected to the output terminal of the receiver.

picture 4

Step 3, we insert the plug to power supply and switch, the power LED light in the receiver shine at once.

picture5

Step 4, the lamp’s plug is inserted to the socket.

picture6

The wiring processing finished.

picture7

Step 5, press button 1, the lamp turns on.

picture 8

Step 6, press button 2, the lamp turns off.

picture 9

 

That is really a simple way to change an ordinary socket to an RF remote control socket. If you have this kind of socket, it is so convenient to you. You can switch on or off any devices plugged into the socket. An rf remote control socket is so easy to make as long as you use our rf remote control products.

Online shop: www.carymart.com/

Pumping water automatically with remote control system

James starts to manage a farm since this year. He needs to pump water to tank in the water tower for irrigation every day. At the beginning, James installed a water level sensor which is connected a gadget with two indication lights. When red light flashing, it means that the water level is low. He needs to switch on the water pump by hand. When the green light flashing, it means that the water level reaches the high level. Gradually, it is tired of him to run to 1000m away to monitor whether water level in the tank gets low or high and switch on or off the pump motor every day. So James would like something will send signal which can make switch of the motor turn on to pump water automatically. So how can we combine pump motor and water level senor with remote controller? Recently, we promote a latched rf remote control system,With the combination of those two gadgets, using a water level senor to remotely control the water pump motor is no longer a Gordian knot. This is a long distance remote controller kit. Transmitting distance is up to 1000m in open field.

1_01

In addition, the major characteristic of CB-2N is that it has two extended wires, which is wired to the electric device. When two wires are connected, the rf signal ”ON” will be sent out; When two wires are disconnected, the rf signal “OFF” will be sent out. That is easy to operate.

1_09

First, look at the circuit configuration.

Remote Control Wireless Switch & Controllers

Here is the wiring picture. The extended wires on transmitter should be connected to the water level sensor. The red wire from the motor is connected to the C terminal of the receiver and black wire from the motor is connected to the negative electrode of the power supply. The positive wire of the supply power is connected to B terminal and positive electrode of the receiver. The negative electrode of the power supply of power supply and receiver are connected together.

CB-2N&water level sensor

S1L-DC&motor-y1

 

When the water level gets low, it makes the contacts of water sensor are closed; with extended wires of transmitter connection, the transmitter is triggered and transmits an RF signal “ON” to the receiver. The receiver output contacts are closed after received the signal, the pump begins to pump water. When the water gets high, it makes the contacts of water sensor are cut; the transmitter is triggered and transmits an RF signal “OFF” to the receiver. The receiver output contacts are cut after received the signal, the pump stops pumping water.

Online shop: www.carymart.com/

To delay the switch of fan with RF remote controller

One of our customers said that he wanted to buy a remote controller to control switch delay. He would like it to control the fan in bedroom to turn off automatically after he slept. It is very energy-saving and money-saving. So we recommend the following remote control kit with time delay function.

1_01

The major characteristic of this model is switch delay. We have timer in the receiver. So the customer can adjust delay time from 0 second to 99 hours according to their requirement.

Here is the application circuit.

1_09

S1DA-AC&fan

From the wiring picture, wires from the fan should be connected the B&C terminal of the receiver respectively. First of all, Press buttons of “+” and “—” on the timer and adjust delay time. If customer wants to fan be off after 2 hours, he will set “H 0 2”, it means the delay time is 2 hours. Then we press button 1, the fan begins to work. After delayed time, the fan will turn off by itself .If we press button 2, the fan is turned off immediately. There is no need to wait for delay time.

Online shop: www.carymart.com/

One remote controller controls many shutters in the house simultaneously

One of our customers intended to buy remote controllers to control his reversible motors shutters. He wants one transmitter to control 4 shutters in each room. The one-to-many remote control system is favorable for him. This set of controller can make the motor rotate in forward and reversal direction.

This is the transmitter and receiver. From the transmitter, we can see two buttons on it.

Button ▲ on transmitter & receiver is for forward direction. Button ▼ on transmitter & receiver is for reversal direction.

1_01

The customer wants to control like this:

1_01

Each of the receivers should learn code from the transmitter so that the transmitter can control 4 receivers simultaneously.

Look at the circuit configuration.

1_06

Here is the wiring picture.

Each motor of the shutter should be connected to the receiver one by one. Every receiver should be connected to the power supply.

S1FM-DC&motor

We press and hold button ▲ on transmitter. With the motors of shutters working continuously in “UP” direction, shutters go up slowly. When we release the button ▲, the motors stop moving. When we press the hold button ▼, the motor works continuously in “DOWN” direction, shutter go down slowly.

shutter1

 

Online shop: www.carymart.com/

An easy way to control a winch remotely

We usually use winch to help us to hoist heavy stuff to higher place or drop to lower place. For example, farmers always store the grain in the warehouse in every harvest season. But the warehouse sometimes is an attic. They usually have to hoist grain bag to the attic by themselves in the past. Actually, that is energy-consuming working. It is too difficult for aged farmers to hoist those heavy bags of grains now. So they want to know if there is an easier way to hoist grain.

The rf momentary motor remote  controller is strongly recommended here. The major characteristic of this receiver is to make the motor in the winch rotate in positive and reversal direction. That is to say, the rope of winch will be stretched out and drawn back by wireless remote controller. The transmitter is also easy to use.

Here are transmitter and receiver.

1_01

The following is the application circuit of receiver.

1_06

From the wiring picture, the wires from the winch are connected to the receiver. We hook up the bag, pressing and holding button ▲ on transmitter. With the motor of winch working continuously in the “UP” direction, the rope is drawn back and the bag is hoisted; When the bag is lifted to the attic, release button ▲, the motor of winch stops working. After putting away the grains bag, we press and hold button ▼ on transmitter, the motor works continuously in the “DOWN” direction , the rope is stretched out and then it reaches the ground.

S1FM-DC&winch2

 

Online shop: www.carymart.com/