AC&DC power output – Page 2 – Remote Control Everything

When we want to control electric devices, we always try to make the wiring, connection and operation easy. If you want electric device can get power supply through the remote controller instead of supplying another power, we’d like to introduce the cell phone Wi-Fi controller with DC or AC voltage output to you.

It supports 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iSO software system. But here we introduce the use under android system. It is applied in modern agriculture field, smart home, instruments, equipment control. Wi-Fi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

Here is the controlling procedure of AC motor for your information. The material is Wi-Fi controller, mobile phone, AC motor and power adaptor.

Connect the motor to the output terminals of WIFI controller as the wiring diagram shown.

Switch on the power of WIFI controller. Wait until power led, ready led and link led turn on. So the Wi-Fi network is connected. After wireless network connection, press the icon of WIFI Controller software to turn it.

Set up working mode for each channel of relay. Four working modes Toggle, Momentary, Latching and Time Delay are provided.

Set up Momentary control mode: Click the ▼ icon of any channel. Choose M (Momentary) control mode.

Press and hold button 1, the motor is positive rotation. Release button 1, motor stops.

Press and hold button 2, the motor is reverse rotation. Release button 2, motor stops.

Video:

Wi-Fi is a sort of short-area wireless networking, which is available in home or other public places, such as canteens, shopping malls, parks, theatres, cinemas. It can allow computers, Smartphones and other gadgets to access to internet without a wired connection. Our product is combined Smartphone with remote receiver via Wi-Fi networking to make Smartphone Wi-Fi Controller.

This kind of Wi-Fi controller is 30amp high current and ac or dc voltage direct output, that is to say, you don’t need to connect the controlled devices to its own power source. They will get through this receiver. It supports 2.1~4.0 version Android Software system and 4.6~6.1 version iOS software system. Here, we will show you how to use this Wi-Fi controller control AC lamp under Android system.

Let’s go through the procedure. Here is the material.

Wiring is fairly simple. You can wire ac lamp to the Output 1 as the wiring diagram shown. There are 8 Output terminals, so you can wire at least 8 devices.

After finishing wiring, we turn on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate. After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 4 working modes in it, which includes Toggle, momentary, latched and time delay modes. Toggle mode is used to control lights.

Press button 1, turn on lamp.

Press button 1 again, turn off lamp.

Video:

Tag: AC&DC power output

Handset Wi-Fi Controller for AC Motor

30amp Output Cell phone Wi-Fi Controller for AC Lamp