DC Remote Module Controls AC Motors—12 Channel

RF remote control transmitter & receiver model of 0020204 (S12CA-DC09/12/24 & CV-12) includes one 12-button remote transmitter and one 12-channel receiver. Each remote button controls each channel of receiver on and off. It can be used to control at most 12 same or different on / off electrical devices. Remote distance is up to 500m. It is widely applied for remote controlling on / off electrical devices such as lights, fans, electric door locks, etc. When you want to control many devices with one transmitter, we think this multi-channel remote control is very favorable. It is powered by direct current (DC). But we still can use it to control alternating current (AC) motors here. We can not only switch on or off motors but also control them forward-reverse rotation.

remote control

Look at the following show.

First off all, we prepare material.

1×12CH rf receiver

1×12-button transmitter

2×AC motor

Some lines

Power supply 220V

S12CA-DC&CV-12 material

Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C. (We choose 4 channel to control 2 motors as example)

0020204 S12CA-DC12 & CV-12

S12CA-DC&CV-12 wiring

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

S12CA-DC&CV-12 button 1 positive rotation

Press and hold button 2, motor 1 rotates in reversal direction. Release the button, motor stops.

S12CA-DC&CV-12 button 2 reverse rotation

Press and hold button 3, motor 2 rotates in positive direction. Release the button, motor stops.

S12CA-DC&CV-12 button 3 positive rotation

Press and hold button 4 , motor 2rotates in reversal direction. Release the button, motor stops.

S12CA-DC&CV-12 button 4 reverse rotation

Operational Video:

10amp AC Remote Switch Controls AC Motors’ Rotation

This 6 channel AC triggered remote control is easy to install and use. It is capable of controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. As for 6 channels, it can control six devices simultaneously at most. With 500m working distance, you can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance. The wireless RF signal can pass through walls, floors, doors or other obstacles. Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada… and voltage of AC220V (200V~240V), used in UK, France…

remote control

We will try to show you how to control positive and reversal rotation of two AC motors with 6 channel AC remote module. We will use four of all relays. Let’s see the following material.

1×6CH rf receiver

1×6-button transmitter

2×AC motor

Some lines

Power supply 220V

S6C-AC220&CV-6 material

Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C.

0020452 S6C-AC220 & CV-6

S6C-AC220&CV-6 wiring

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

S6C-AC220&CV-6 button 1 positive rotation

Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.

S6C-AC220&CV-6 button 3 reversal rotation

Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.

S6C-AC220&CV-6 button 2 positive rotation

Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.

S6C-AC220&CV-6 button 4 reversal rotation

Operational Video: