4 working modes – Remote Control Everything

Question from customer:

I need a four channel receiver and transmitter to control lights or LEDs at 300 meters, 12 volt DC power. Do you have a system? Please respond as soon as possible. Large quantities are possible if we can find the right controlling system.

Answer:

4 channel 12VDC Power Output Switch Kit (S4X-DC12-ANT2&CB-4L) is your better choice. 4 lights or LED lamps can be wired to its channels. And 4 lamps can get power directly from the powered receiver. It is very convenient to you because you don’t have to supply additional power to lights. 2000m can be reached in the open field with the external extend magnetic antenna. Besides controlling lights, it can be applied to many fields, such as motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances.

Here is the wiring diagram. It is simple to wire lights. Wire four lights to A&B terminals from relay 1 to relay 4. Supply 12VDC to the receiver.

There are four working modes in this kit. They are toggle, momentary, latched, momentary + toggle modes.

Setting different control modes

•1) Setting control mode Toggle: Only connect Jumper-2.

Press button A: Turn on the relay 1, terminal OUT 1 (A&B) outputs DC power.

Press button A again: Turn off the relay 1, terminal OUT 1 no output.

Press button B: Turn on the relay 2, terminal OUT 2 (A&B) outputs DC power.

Press button B again: Turn off the relay 2, terminal OUT 2 no output.

……

•2) Setting control mode Momentary: Only connect Jumper-1.

Press and hold button A: Turn on the relay 1, terminal OUT 1 (A&B) outputs DC power.

Release button A: Turn off the relay 1, terminal OUT 1 no output.

Press and hold button B: Turn on the relay 2, terminal OUT 2 (A&B) outputs DC power.

Release button B: Turn off the relay 2, terminal OUT 2 no output.

……

•3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press button A: Turn on the relay 1, terminal OUT 1 (A&B) outputs DC power.

Turn off the relay 2, terminal OUT 2 no output.

Press button B: Turn on the relay 2, terminal OUT 2 (A&B) outputs DC power.

Turn off the relay 1, terminal OUT 1 no output.

……

•4) Setting control mode Momentary (Channel 1~2) + Toggle (Channel 3~4): Connect Jumper-1 and Jumper-2.

When you control motors of awnings, electric rolling blinds, winches, projector screens, linear actuator, pumps and other devices far away. And you just want to stay with leisure in you couch to remote control devices mentioned above. Then long range wireless remote control system is the solution.

4-channel remote control model of (S4U-DC12-ANT2+CB-4). It includes long distance remote transmitter and receiver with magnetic mount antenna. The working distance is up to 2000m (6000ft) in the open field. Transmitting signal can pass through walls, floors, doors or other obstacles. You can control the motor rotate in positive and reversal direction from any place within reliable distance.

Next, we will prepare a show to tell you how to control 2 AC motors’ rotation in two directions.

Let’s see the following material.

1×4CH rf long range receiver

1×4-button long distance transmitter

2×AC motor

Some lines

Power supply

Here is the wiring diagram. This is the wiring for AC motors. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C. Surely, the receiver must be supplied DC 12V power.

There are 4 working modes. They are toggle, momentary, latched and toggle+momentary modes.

Momentary mode is usually set to control motor.

Press and hold button A, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button D, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button B, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button C, motor 2 rotates in reversal direction. Release the button, motor stops.

Operational Video:

Tag: 4 working modes

4 Channel 12VDC Remote Control Kit for Lights

4-Channel Remote Control for 2 AC Motors 2000M