Wireless Vibrator Remote Control is used in the conference room

Wireless vibrator remote control can be used home , office, restaurant and so on. Today I will talk about how to use vibrator in the conference room through taking a example.

Question from customer:

Hi. I want to be able to have two different conference room occupants be able to push a button to summon me back to one of those two conference room. I need two transmitters and one receiver really. It would be great to have the receiver distinguish (by tone or vibration quality) which transmitter is summoning me. Can you help?

office

 

Answer:

We provide you with the wireless vibrating pager (Z-02 & 2C-1). Z-02 is the vibration receiver. C-1 is the transmitter. The receiver wirelessly remote control the transmitter by RF signal that can pass through walls, floors and doors. You can install the vibration receiver in the office. Two transmitters are placed in two conference rooms respectively. When the occupiers need your help, he /she presses the button on the transmitter; you could get there as soon as you hear the vibrations.

1_0222 0022

 

There are four working modes in the receiver. That is to say, the vibrator can vibrate once, twice, three times, four times. We advise you choose once-vibrating mode and four times-vibrating mode in order to better distinguish between the vibration frequency of vibrators, When one conference room occupant need summon you back, he/she presses the button on the transmitter; you can immediately rush to the meeting room when you hear the receiver vibrating once. If you hear the receiver vibrating four times, you can go to the other conference room.

Please look at receiver internal structure below. There are antenna, vibrator, battery, LED light, and button in the wireless vibration receiver. The reliable distance is 50M with the antenna.

1_05

 

One of the most remarkable features is the function of learning codes. There are the specific steps below.

Procedure:

1) Press the learning button of the receiver, LED light is on, the receiver is in the status of LEARNING.

2) Press any button of remote control within 7 seconds, if LED light flashes twice slowly then off, it means LEARNING is successful.

If LED light is off after 7 seconds, it means LEARNING is failed and the receiver quits the status of LEARNING.

3) The receiver can learn several remote controls of different codes.