We recommend the wireless remote control facility here. It is model: S2DA-DC12 & C-4. The receiver (S2DA-DC12) is 2 channels and it can connect two DC lamps. The transmitter (C-4) can remote control receiver and control distance is 100m/300ft theoretically. The wireless remote control facility has time delay function. You can connect two DC lamps to receiver and use the transmitter to remote control with time delay lamp on/off.
Here is the circuit diagram of receiver. You can connect two DC lamps to B terminal of relay 1 and relay 2 in the receiver. Then supply power to receiver. When you press the button of transmitter, the lamp will on/off by wireless remote control with time delay.
The wireless remote control facility is delay control mode and you set the mode as the operation:
Firstly press buttons of “＋” and “－” on the timer, adjust delay time from 0 second to 99 hours. Two buttons of Timer 1 adjust delay time of relay 1; two buttons of Timer 2 adjust delay time of relay 2. “H” is Hour, “M” is Minute, and “S” is Second.
Secondly for example, if you set “1 0 M 0 3” on Timer, it means the delay time on Timer 1 is 3 minutes; the delay time on Timer 2 is 10 minutes.
Thirdly Press button 1: Turn on lamp 1 (connect B and C, disconnect A and B).
After 3 minutes: Turn off lamp 1 by itself (disconnect B and C, connect A and B).
Press button 3: Turn off lamp 1 immediately, no need to wait for delay time.
Press button 2: Turn on lamp 2 (connect B and C, disconnect A and B).
After 10 minutes: Turn off lamp 2 by itself (disconnect B and C, connect A and B).
Press button 4: Turn off lamp 2 immediately, no need to wait for delay time.
Finally you can enter into the website and search the wireless remote control facility as following:
Model: 0020320 (S2DA-DC12 & C-4)
Website:
http://www.carymart.com/2-channel-9v-12v-24v-rf-remote-control-kit-adjustable-time-delay-p-1212.html
RF website:
http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_245_350&products_id=1115
Follow