One remote controller controls many video cameras

You are going  to install a security system with video cameras in somewhere in you new house, the door gate, garage, porch, living room, bedrooms. Yes, it is inconvenient for you to hold many remote controllers to turn on or off those video cameras. Or sometimes, you can not find all of controllers when the house is in a mess. At this moment you wonder whether it is possible to wire some video cameras to be controlled by one remote controller or not. We have many kinds of remote transmitters and we consider a set handy electronic remote controller can help you. CB series transmitter, CB-6 is one of those transmitters, which can connect with 6 receivers. It pairs with the receiver,S1UB-DC12. You can control video cameras with just one remote controller easily.

It is so easy to install. Look at the wiring picture.

 

Wires on the video camera should be connected to the receiver and power supply. From the picture, the red wire from the video camera is connected to B terminal of the receiver and the black wire is connected to negative electrode of the power supply. The positive wire of the power supply is connected to C terminal of the receiver.

The transmitter and receivers should come to the “Toggle Mode”. This means pressing each button controls each video camera on or off separately.

When press button 1, the transmitter is triggered and sends out an RF signal “ON” to the receiver. After the receiver receives the signal, the corresponding video camera is on. When press button 1 again, the transmitter is triggered and sends out an RF signal “OFF” to the receiver. After the receiver receives the signal, the corresponding video camera is off…

It is really a simple and convenient way to control all video cameras from one remote controller.

Online shop: www.carymart.com/

Leave a Reply