Integrated Smartphone Wi-Fi Controller for AC Lamp

Many people use iOS system launched by Apple Inc because it is fashionable, easy to use, and convenient. It is also applied for other apple devices such as iPod Touch, iPad other than iPhone. And Wi-Fi is Wireless Local Area Network which is easier to get access to network to surf. Most Smartphones can get access to network through Wi-Fi. Now we integrate Wi-Fi networking and device with iOS system to develop a brand new product, Smartphone Wi-Fi Controller.


It works under Wi-Fi connection. With 8-channel high-current output (30amp), you can wire at least 8 devices to it. With external antenna for longer range, the theatrical working distance is 2000M (6000ft) in the open air. Actually, we design this controller for 2 Smartphone working systems— 4.6 ~ 6.1 version iOS and 2.1 ~ 4.0 version Android systems. We will illustrate the iOS system controlling lamp here. It must work on the jailbroken iPhone, iPad, iPod Touch. Where there is Wi-Fi networking, there is this Wi-Fi controller. It Applied in modern agriculture field, smart home, instruments, equipment controlling. Wi-Fi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

Let’s see the procedure. We have Wi-Fi controller, AC lamp, iPod, power adaptor.

WF-8-2R ios-material

Wire lamp to OUTPUT 1 and supply power to receiver. Lamp will get power through receiver.

wifi control lamp

WF-8-2R ios wiring

After switching on power, wait until power led, ready led and link led turn on. So the Wi-Fi network is connected. After wireless network connection, press the icon of WIFI Controller software installed in advance to turn on it.

WF-8-2R ios connection

Set up working mode for each channel of relay. Four working modes Toggle, Momentary, Latching and Time Delay are provided.

Set up Toggle control mode: Press the “T” icon of any channel. Choose T (Toggle) control mode.

WF-8-2R ios shift mode

Press the icon and the color of icon changes to green, the corresponding relay will be on. Lamp is on.

WF-8-2R ios lamp on

Press the icon again, the relay will be off. Lamp is off.

WF-8-2R ios-lamp off

Set up Time Delay control mode: Press “0s” icon of any channel. Enter the delay time, then press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. For example, if you want 5 seconds delay time, you can set 5 (s).

WF-8-2R ios delay time setting

Press the icon, lamp is on.

WF-8-2R ios delay time lamp on

After 5 seconds, the lamp will be off automatically.

WF-8-2R ios delay time lamp off


Leave a Reply