February 11, 2015 – Remote Control Everything

We recommend the wireless remote control equipment. It is model: S1T-DC12-ANT1 & CWB-1. The receiver (S1T-DC12-ANT1) is 1 CH and can connect one appliance to relay. The power supply includes DC 06/09/12/24V. The transmitter (CWB-1) can remote control the appliance on/off within 50m/150ft theoretically. The wireless equipment remote control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. You can connect one DC motor to receiver and use the transmitter remote control motor rotation or stop.

Here is the circuit diagram of receiver. You can connect one DC 12V motor to B terminal of relay in the receiver. Then supply power DC12V to receiver by connecting positive pole and negative pole to power terminal. Besides, you should connect “B & C” terminal to power terminal. When you press the button of transmitter, the motor will rotate or stop by wireless remote control.

The wireless remote control equipment is toggle control mode. You can operate as the process:

Press button: Turn on motor (connect B and C, disconnect A and B)

Press button again: Turn off motor (disconnect B and C, connect A and B)

Finally you can enter into the website and search the wireless remote control equipment as following:

Model: 0020246 (S1T-DC12-ANT1 & CWB-1)

Website:

http://www.carymart.com/1-channel-dc-power-rf-wireless-remote-control-transmitter-receiver-toggle-control-mode-p-753.html

http://www.ourautomation.com/1-channel-dc-power-rf-wireless-remote-control-transmitter- receiver-toggle-control-mode-p-753.html

Question from a customer:

Hi, I am looking for a 2 channel long range remote system, here is my plan. I am going to solder the receiver to a USB computer game controller, so that by pressing either button on the transmitter, it presses buttons on the controller. However, I want to be able to do this from about 200m away (on and open field outside). Do you any product that might work for this?

Answer:

We recommend the wireless remote control kit for you. It is model 0020213 (S2U-DC12-ANT2 & CB-2). It includes one receiver S2U-DC12-ANT2 and one remote control CB-2.

The receiver S2U-DC12-ANT2 has 2 relays output. And it has three different work mode: Toggle, Momentary and Latched, we set the receiver to momentary work mode for this application.

You can use this remote control CB-2 to control these 2 relays output within 2000m/6000ft theoretically. For each relay output in the receiver, the terminal A and B is normally closed; and the terminal B and C is normally open. When you press and hold one button on the remote control CB-2, it will connect the terminals B and C of one relay output. And when you release this button on the remote control CB-2, it will disconnect the terminals B and C of one relay output. So we can use the terminals B and C to control the buttons on the USB Computer Game Controller.

Here is the circuit diagram of the receiver S2U-DC12-ANT2. First we connect the button on the USB computer game controller to the receiver‘s terminal B and C by two wires, and supply the power (DC 12V) to the receiver, then you can press two buttons of remote control CB-2 to control two buttons on computer game controller. Of course, you can also directly press these two buttons on computer game controller for control your computer game.