September 5, 2014 – Remote Control Everything

Question from customer:

I need a 2 channel receiver with 2 remotes 1 channel. One remote control activates the channel A receiver on the receiver and another remote to turn on the channel B on the receiver. Is it possible with the CWB-1 model? And which receiver would like to recommend?

Answer:

We recommend 2 channel 12V multi-mode receiver (S2U-DC12) and two waterproof wireless 50m remotes (CWB-1). We set configured code for them so that they can work together. The receiver is 12V activated and has two relays. When it works with that transmitter, its transmission distance can reach 50m in the open air. There is only one button on each transmitter.

It can control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors, doors and other obstacles.

We will take a dc lamp wiring method as an example.

A,B terminals is normally closed. B,C terminals is normally open.

Wire two lamps to B&C terminals of each relay. Do as following picture shown.

Usage:

Setting control mode Toggle: Only connect Jumper-2.

Press the first remote -> lamp 1 is On; Press the first remote again -> lamp 1 is Off.

Press the second remote -> lamp 2 is On; Press the second remote again -> lamp 2 is Off.

Setting control mode Momentary: Only connect Jumper-1.

Press and hold the first remote -> lamp 1 is On; Release the first remote -> lamp 1 is Off.

Press and hold the second remote -> lamp 2 is On; Release the second remote -> lamp 2 is Off.

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Press -> On, another relay Off; Press another button -> Off.

Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Channel 1): Press -> On; Press again -> Off.

Control mode Toggle (Channel 2): Press and hold -> On; Release -> Off.

We recommend the wireless device of long range remote control motor. It is model: S4C-DC12-ANT2 & CB-4L. The receiver (S4C-DC12-ANT2) has 4 relays and can connect 4 DC appliances. The transmitter (CB-4L) can remote control the appliances on/off within 2000m/6000ft theoretically because of the external extend antenna in the receiver. Besides, the wireless device remote control lights, motors, fans, electrically operated doors/ locks/ windows/ blinds/cars or other appliances with AC110~240V or DC0~28V. For example, you can connect 4 DC motors to receiver.

Here is the circuit diagram of receiver. You can connect 4 DC motors to C terminal of relays in the receiver. Then supply power DC 12V to receiver by connecting wires to positive pole and negative pole. You press one button of transmitter, one of four motors will turn on/off by wireless remote control.

The wireless remote control device has four control modes: toggle, momentary, latched, momentary+toggle. You can choose any one of four control modes. We introduce momentary control mode here.

You only connect Jumper-1, it is momentary control mode.

Press and hold button A: Turn on motor 1 (connect B and C, disconnect A and B)

Release button A: Turn off motor 1 (disconnect B and C, connect A and B)

Press and hold button B: Turn on motor 2 (connect B and C, disconnect A and B)

Release button B: Turn off motor 2 (disconnect B and C, connect A and B)

Press and hold button C: Turn on motor 3 (connect B and C, disconnect A and B)

Release button C: Turn off motor 3 (disconnect B and C, connect A and B)

Press and hold button D: Turn on motor 4 (connect B and C, disconnect A and B)

Release button D: Turn off motor 4 (disconnect B and C, connect A and B)

Of course, you can also set other control modes according to the product’s instruction in our website.

Finally you can enter into the website and search the wireless remote control device as following:

Model: 0020510 (S4C-DC12-ANT2 & CB-4L)

Website:

http://www.carymart.com/4ch-2000m-5a-dc-long-distance-rf-remote-control-receiver-transmitter-learning-code-p-1537.html

http://www.ourautomation.com/4ch-2000m-5a-dc-long-distance-rf-remote-control-receiver-transmitter-learning-code-p-1537.html

Day: September 5, 2014

Two Single Channel Transmitters Remote Control Two Relays on One Receiver

Wireless remote control 4 DC 12V motors within 2000m/6000ft