Mobile Phone Remote Control Linear Actuator Motor

We’d like to introduce another kind of mobile phone WiFi controllers-8 Channels AC or DC 30A High Power Output WiFi controller (WF-8-2R). This WiFi controller is 8 channels AC or DC 30amps output, so you can use it to remote control high power device. We will show you how to remote control linear actuator.

WF-8-2R WiFi controller

Here is the material we prepared.

1×WIFI controller (WF-8-2R)

1×mobile phone

1×12VDC Linear Actuator Motor

1×9VDC 1A Power Adapter (for WIFI controller)

1×12VDC 6A Power Adapter (for linear actuator )

Wires

material

The WiFi controller has ac/dc power output terminals. The wiring looks like this.

Brown wire of linear actuator is wired to Output 1, blue wire of linear actuator is wired to Output 2. Wire 12VDC 6V power adapter to Input terminals of controller and 12VDC 1A power adapter to power supply terminal of controller.

wiring  diagram

wiring

After switching on power, the first LED is on. This is the power LED. Waiting for a while, we connect mobile phone WiFi when the WIFI start-up LED shines (the second LED). After a while, WiFi connection status LED shines when the WiFi connection is successful. We press control software icon which is installed in the mobile phone in advance to enter operated status. And press the “connect” from the top right corner.

press icon of software

Set Momentary control mode for relay 1 and relay 2: Click the ▼ icon of 1&2 channels. Choose M (Momentary) control mode for each channel.

choose M mode

Press and hold button 1, motor shaft extends. Release button 1, motor shaft stops.

press button 1

Press and hold button 2, motor shaft retracts. Release button 2, motor shaft stops.

press button 2

Video: