Wireless Calling Transmitters&Receiver Host for Hospital

Question from customer:

I manage a small new hospital. Now I want a remote control system which includes six remote transmitters and one 6-channel receiver. Each remote controller is put on every desk beside bed. And the receiver is put in the nurse station. When there is patient calling, he can press the button to notify the nurse station in time.

Answer:

We recommend wireless calling system. They include a 999-channel receiver host and more than one transmitter at your option. You can choose six calling buttons That is to say, you can pair up 999 transmitters with a 999-channel receiver host at most. This kit is multi-mode. We’d like to make a presentation of hospital mode.

We prepare a receiver host, 6 calling transmitters, manager remote and 9V power supply for receiver host.

There are three steps to pair up transmitters and receiver host.

Working mode setting:

After switching on power, press and hold button 1 of manager remote for 2sec to enter setting menu, press button “3″ or “4″ to choose Cd8, press button 1 again to enter submenu of Cd8, press button “3″ or “4″ to choose “4″ (Mode 4: Hospital mode), press button “2″ to turn back to setting menu.

ourautomation-wireless calling system 1

Calling button pairing:

Press button “3″ or “4″ to choose Cd7, press button 1 again to enter submenu of Cd7, press button “3″ or “4″ to choose “011″, Press button of transmitter 1, the speaker will sound “successful registration” and 4 LED indicators will flicker. The display screen turn to next number “012″ automatically. Then you can continue to do the next pairing up from transmitter 2 to transmitter 6. Press button “2″ to turn back to setting menu.

ourautomation-wireless calling system 2

Key switch setting:

Press button “1″ to enter submenu of Cd6 to choose “2″(2-key mode). Press button “2″ twice to turn back to standby status.

(After all the settings are finished, please power off the host and restart.)

ourautomation-wireless calling system 3

Operation:

Press button on the transmitter 1, screen reads “011” and sounds “Dingdong+ Room 1+No.1 Call”

Press button on the transmitter 2, screen reads “012” and sounds “Dingdong+ Room 1+No.2 Call”

Press button on the transmitter 6 screen reads “016” and sounds “Dingdong+ Room 1+No.6 Call”

ourautomation-wireless calling system 4

Video:

https://www.youtube.com/watch?v=M4_Rk_8I29A&feature=youtu.be

Remote control delay time of DC lamp on/off by wireless kit

We recommend the wireless remote control facility here. It is model: S2DA-DC12 & C-4. The receiver (S2DA-DC12) is 2 channels and it can connect two DC lamps. The transmitter (C-4) can remote control receiver and control distance is 100m/300ft theoretically. The wireless remote control facility has time delay function. You can connect two DC lamps to receiver and use the transmitter to remote control with time delay lamp on/off.

receiver & transmitter

Here is the circuit diagram of receiver. You can connect two DC lamps to B terminal of relay 1 and relay 2 in the receiver. Then supply power to receiver. When you press the button of transmitter, the lamp will on/off by wireless remote control with time delay.

circuit diagram

The wireless remote control facility is delay control mode and you set the mode as the operation:

Firstly press buttons of “+” and “-” on the timer, adjust delay time from 0 second to 99 hours. Two buttons of Timer 1 adjust delay time of relay 1; two buttons of Timer 2 adjust delay time of relay 2. “H” is Hour, “M” is Minute, and “S” is Second.
Secondly for example, if you set “1 0 M 0 3” on Timer, it means the delay time on Timer 1 is 3 minutes; the delay time on Timer 2 is 10 minutes.

Thirdly Press button 1: Turn on lamp 1 (connect B and C, disconnect A and B).
After 3 minutes: Turn off lamp 1 by itself (disconnect B and C, connect A and B).
Press button 3: Turn off lamp 1 immediately, no need to wait for delay time.

Press button 2: Turn on lamp 2 (connect B and C, disconnect A and B).
After 10 minutes: Turn off lamp 2 by itself (disconnect B and C, connect A and B).
Press button 4: Turn off lamp 2 immediately, no need to wait for delay time.

Finally you can enter into the website and search the wireless remote control facility as following:

Model: 0020320 (S2DA-DC12 & C-4)

Website:

http://www.carymart.com/2-channel-9v-12v-24v-rf-remote-control-kit-adjustable-time-delay-p-1212.html

RF website:

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_245_350&products_id=1115