Day: May 28, 2014

High Power Remote Controller Switch Off/On Motor of Children’s Tractor

Overview:

I’m looking for a High power remote controller to switch on/off the power to my children’s “John Deere ground force” 12v tractor if necessary. According to the specifications on the tractors the motors are 330watt and are driven by 12v battery. 330/12=27.5 amps. So I guess I need a 30amp controller.

tractor

Solution:        

We recommend the model of 1 channel 30amp 12V remote controller (S1PU-DC12&C-2). Its maximum current output is 30amp. It is suitable for appliances with AC110~240V or DC0~28V because of its normally open & closed relay contact. There are 3 working modes in it. The transmitting distance is about 100m (300ft). It is enough for you.

1_02

You can see its wiring diagram. We suggest that you should learn this wiring way. That will be much convenient to you.

Wire tractor’s motor to “A” terminal and negative terminal of receiver. Use a wire to connect “B” terminal and positive terminal of receiver. And wire positive and negative terminal to 12 power supply.

circuit

 

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on the tractor motor, the tractor moves.

Press button 2: Turn off the tractor motor, the tractor stops.

Email, RSS Follow

AC 220V motor wireless controller with transmitter & receiver remote a winch

Question from customer:

I am looking for a wireless remote to control a winch (forward, reverse, momentary contact).Switch a 120 V or 220 V 1/2 HP motor.

Answer:

We introduce the wireless remote control device to you. It is model: S1FM-AC220 & CV-2-2. The receiver (S1FM-AC220) can control motor positive rotation and reversal rotation. And the working voltage is AC 100~240V. The transmitter (CV-2-2) is 2 channels and remote control distance is 500m/1500ft theoretically. You can connect motor of winch to receiver and use wireless transmitter to remote control the motor rotates.

receiver & transmitter                      winch

Here is the circuit diagram of receiver. You can connect AC motor of winch to terminal “UP”, “COMMOM” and “DOWN” in the receiver. Then connect live wire to terminal “L” and neutral wire to terminal “N” for supplying power to receiver. When you press the button of transmitter, the motor will rotate and activate winch run by wireless remote control.

 circuit diagram

The wireless remote control device is momentary control mode. You can operate as following process:

When you press and hold button ▲ on remote or receiver: Terminals UP and COMMOM directly output AC110V / AC220V; motor rotates continuously in positive direction.
Release button ▲ on remote or receiver: Stop the motor.

When you press and hold button ▼ on remote or receiver: Terminals DOWN and COMMOM directly output AC110V / AC220V; motor rotates continuously in reversal direction.
Release button ▼ on remote or receiver: Stop the motor.

Besides you can also enter into the website and know more something about the wireless remote control device.

Model: 0020325 (S1FM-AC220 & CV-2-2)

 

Website:

http://www.carymart.com/ac-100240v-motor-momentary-remote-control-transmitter-receiver-p-1505.html

 

RF website:

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=255&products_id=1329

Email, RSS Follow