How to Remote Control 8 Lights with 2 Remote Transmitters

Overview:

“I am trying to set up a system with two 4-channel AC receivers and two remotes. What I’d like to do is have 4 lights hooked up to each receiver: (A,B,C,D,) on one receiver and (a,b,c,d) on the second. I would like Remote 1 to turn on/off lights A and a at the same time and lights B and b at the same time. I would like remote 2 to turn on/off lights C and c at the same time and D and d at the same time.”

Solution:

Yes, we recommend two AC power output 4 channel remote receivers (S4X-AC220) and two single-button transmitters (C-1) and set them to work according to your request.

For the receivers, they work at AC 110V/220V. Lights can be wired to relay output terminals and do not need supply additional power. For the remotes, C-1 has only one button. You can set toggle mode. (Press button, turn on device; press button again, turn off device)

remote-control-kits

Wiring is as the following picture shown.

circuit

When you press the button on the remote 1, it will turn on four lights A and a, B and b at the same time.

When you press the button on the remote 1 again, it will turn off four lights A and a, B and b at the same time.

When you press the button on the remote 2, it will turn on four lights C and c, D and d at the same time.

When you press the button on the remote 2 again, it will turn off four lights C and c, D and d at the same time.

Two 4 channel AC 220V wireless receivers & two transmitters remote control light on/off

Question from customer:

I am trying to set up a system with two 4-channel AC receivers and two remotes. What I’d like to do is have 4 lights hooked up to each receiver : (A,B,C,D,) on one receiver and (a,b,c,d) on the second. I would like Remote 1 to turn on/off lights A and a at the same time and lights B and b at the same time. I would like remote 2 to turn on/off lights C and c at the same time and D and d at the same time.

Answer:

We recommend the wireless remote control facility to you for satisfying your requirement. It is model: S4X-AC220 & C-1. The receiver (S4X-AC220) is 4 channels and working voltage is AC 100~240V. The transmitter (C-1) is 1 channel and wireless remote control distance is 100m/300ft theoretically. If you connect 4 lights to receiver, you can use wireless transmitter to remote control 4 lights. Of course if you would like to use two receivers and two transmitters at the same time, we can set work mode of the wireless remote control facility for you. Then you can use two transmitters control 8 lights at the same time.

1_04003

 

Here is the circuit diagram of receiver. You can connect 4 lamps to “A & B” terminal of relay in each receiver. Then supply power to receiver. After you press the button of transmitter, the lamp will on/off by wireless remote control.

1_08

There is only one control mode for the wireless remote control facility: toggle. You can operation to reach your requirement of control 8 lights by using two receivers and two transmitters as following:

When you press the button on the transmitter 1, it will turn on four lights A and a, B and b at the same time.

When you press the button on the transmitter 1 again, it will turn off four lights A and a, B and b at the same time.

When you press the button on the transmitter 2, it will turn on four lights C and c, D and d at the same time.

When you press the button on the transmitter 2 again, it will turn off four lights C and c, D and d at the same time.

 

Finally you can also enter into the website and search the wireless remote control facility as following:

Model: S4X-AC220 & C-1

Website:

S4X-AC220

http://www.carymart.com/4ch-110v-or-220v-10a-ac-power-output-rf-remote-control-receiver-4-control-modes-p-1599.html

C-1

http://www.carymart.com/1-button-100m-wireless-remote-control-transmitter-with-cover- p-213.html

RF website:

http://www.rfcontrolsystem.com/