Operation for Delay Time of one 220V Motor Runs by Wireless Remote Control

Question from customer:

I am looking for a device to wireless operate a 220v motor for 20 minutes. I press a remote control, the engine starts and runs for 20 minutes.

Answer:

This is the delay time device by wireless remote control. It is model: S1DA-AC220 & C-2. The receiver is S1DA-AC220 and the transmitter is C-2. The transmitter can wireless remote control the receiver. The receiver has the function of delay time control. That means after you connect the motor to the receiver, you can set the delay time of motor runs in the receiver. When you press the button of the transmitter, the motor will run within the delay time.

It can control lights, motors, fans, electrically operated doors/locks/windows/blinds/ cars or other appliances. You just need to connect the appliances to the receiver and set the delay time in the receiver. When you press the button of the transmitter, the appliances can run according to your setting by wireless remote control.

1_04

 

Here is the circuit diagram. You can connect one motor to the “B & C” terminal of the receiver. Then supply power to the receiver. After you set the delay time, you can wireless remote control the motor on/off.

You can set the delay time of the motor on the “Timer” button.

l  Press buttons of “+” and “-” on the timer, adjust delay time from 0 second to 99 hours.

l  “H” is Hour, “M” is Minute, and “S” is Second.

l  For example, if you set “M 2 0”, it means the delay time of motor is 20 minutes.

 

Besides, the wireless remote control device just has one delay control mode as following:

Press button 1: Turn on motor (connect B and C, disconnect A and B).

After delay time: Turn off motor by itself (disconnect B and C, connect A and B).

If you set the delay time of motor is 20 minutes, the motor will stop running by itself after 20 minutes.

Press button 2: Turn off motor immediately, no need to wait for delay time.

1_06         1_09

Finally, you can enter into our website and know more details about the device with wireless remote control delay time of motor runs through searching the product as following:

Model: 0020258 (S1DA-AC220 & C-2)

 

Website:

http://www.carymart.com/

 

http://www.carymart.com/1ch-ac100240v-rf-remote-control-switch-delay-time-adjustable-p-734.html

 

Wireless vibrating pager is used home /office /restaurant

Wireless vibrating pager is used to make our lives more convenient and automated. It includes wireless vibration receiver and the transmitter. The wireless can be used at home and in the office and restaurant. When an old people need be taken care at all times, you can use the wireless vibrating pager. The person who care for the old people should put the wireless vibrator in his/her pocket, The old people can press the button on the transmitter when he/she need some help, the person could reach there in time while he/she hear the vibrator receiver vibrating.

vibrator

1_0110022

 

 

The vibrating machine is mostly used to remind people. Above we have already talked about how to use wireless vibration calling machine at home, Let us talk about how to use it in the office and restaurant. Manager press the button on the transmitter; when the secretary hear the calling machine vibrating, he/she know the manager want his/her to deal with some things. If you use wireless vibrator in the restaurant, it is very convenient for cook to remind the waiter serve customer immediately when the dished have been finished. The use of the wireless calling machine will save time and improve service quality in the restaurant.

 

The wireless vibrator can be used for looking after the older people at home.

home

 

 

The wireless vibrator can be used in the office when manager want the secretary to deal with some things.

download

 

 

The wireless vibrator can be used in the restaurant kitchen.

20091129122130481

 

 

If you need vibrator machine, you can choose Z-04 & C-1 or Z-04 & CP-1. Z-04 is the vibrating receiver. Both C-1 and CP-1 are the transmitters. The reliable distance of C-1 is 50m/150ft theoretically. The long range of CP-1 is up to 200m/600ft theoretically. The transmitter can wirelessly control the remote vibration receiver by RF signal that can pass through walls, floors and doors.

 

 

1000m Range Multi-mode Beeper& Vibrator Remote Control Kit

Beeper is an audio signaling device, which is used in alarm devices, timers or other devices typically. A customer is interested in our remote-controlled beeper& remote transmitter kit. He needs 12 beepers and 12 transmitters with 1000m working distance but He wants to be able to register one transmitter to two beepers and two transmitters to one receiver. It is possible to pair up one transmitter to two beepers or two transmitters to one receiver.

1    1_03

This beeper kit has vibration mode and vibration mode &beeper mode other than beeper mode. The receiver works with 1000m-range transmitter. Its working distance can reach 1000m in the open field. You can control the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.

1_05

To realize one transmitter controlling two beepers or two transmitters controlling one receiver, first of all, you should use receiver to learn codes from transmitter.

One transmitter controlling two beepers:

Press and hold the learning button of the first receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of Learning.

Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful.

If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.

Follow steps above to make the second receiver learn code from the transmitter.

Operation 1:

Vibration mode: Press the button of transmitter, two receivers vibrate for 5 seconds.

Beep mode: Press the button of transmitter, two receivers beep for 5 seconds.

Vibration & Beep mode: Press the button of transmitter, two receivers vibrate and beep together for 5 seconds.

Two transmitter controlling one receiver:

Press and hold the learning button of the receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of Learning.

Press button of the first transmitter within 10 seconds, if LED light flashes twice then off, it means Learning is successful.

If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.

Follow steps above to make the receiver learn the second transmitter.

The receiver can learn several remote controls of different codes.

Operation 2:

Vibration mode: Press the button of transmitter 1, the receiver vibrates for 5 seconds; Press the button of transmitter 2 the receiver vibrates for 5 seconds.

Beep mode: Press the button of transmitter 1, the receiver beeps for 5 seconds; Press the button of transmitter 2, the receiver beeps for 5 seconds.

Vibration & Beep mode: Press the button of transmitter 1, the receiver vibrates and beeps together for 5 seconds; Press the button of transmitter 2, the receiver vibrates and beeps together for 5 seconds.

Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of transmitter again, switch to vibration & beep mode; press the button of transmitter again, switch to vibration mode.

Wireless hand-held remote control and wall-mounted switch control a lamp

We have a variety of wireless remote control. Generally, one transmitter controls one receiver, but one/several transmitters can control one/several receivers simultaneously. So you can make the best choice according to your needs. The following is the example that two transmitters control one receiver. A hand-held switch and wall-mounted switch control a lamp, or two hand-held switches control the light at the same time.

Question from customer:

I want to use your wireless remote control to control my outdoor lighting by two possibilities. I wish I could turn the light on or with your remote control or with the push button which is installed in the house. Is it possible to also establish the contact by two wires connected to my existing push button in the house? Can you help?

 

Answer:

According to your requirements, we recommend Model (S1PX-AC220 & 2C-1). The wireless remote control includes one receiver (S1PX-AC220) and two transmitters (C-1). One transmitter can be moved to any place you want, the other transmitter can be connected to your existing push button by two wires in the house. If you don’t want to use push button in the house, the transmitter HR-1 can replace one of two transmitters C-1. This is to say, you can use the same receiver (S1PX-AC220) and two transmitters (C-1 & HR-1).

 

The first option: one receiver (S1PX-AC220), two transmitters (C-1)

1_0550022

 

 

The second option: one receiver (S1PX-AC220), two transmitters(C-1&HR-1)

Though the transmitter HR-1 is like the universal switch from appearance, it is wireless wall mounted remote control. It is easier for you to install it with double-sided adhesive tape.

1_0550022

1_1111

 

 

Look at the application circuit of the receiver below. The input terminals N&L should be wired to additional supply power. We should connect the lamp to the output terminals N&L. Because the receiver can supply power to the lamp, the lamp needn’t be supplied to additional power.

1_09

 

One Command from Transmitter Activates Four Devices Off or On at Remote Receiver

Sometimes, you want to remote control more than one electric devices just with one transmitter,but most of remote control systems only allow one command at a time to remote control one device even though they are able to activate 2 or more relays. Or you are just looking for a remote control system with range of only 100m that will allow the activation of least three or four commands simultaneously and then trigger three or four channels on the receiver at the same time.

Actually, you thought can be realized if the 4 channel 12VDC long range receiver’s interior circuit can be changed and pair with 1-button transmitter. You just need only one button on the transmitter that you can remote control 4 devices. Its working distance is beyond your thought. It can reach 2000m (no obstacles).

remote control kit-carymart

You wire either AC 110~240V or DC0~28V electric devices to receiver because of its normally open and closed contact terminals. Electric devices usually wire to normally open terminals for safety purpose. Especially, if it is ac power activated remote control receiver. Receiver and controlled devices will not share the same power supply from the following wiring.

light controlling circuit- carymart

On the other hand, if you want to wire dc motivated device, such as led lights or dc motors, you can look at the following wiring diagram for your reference. Motors will share the same power supply with the receiver.

RF remote controller's motor-controlling-circuit-carymart

When you press the button on the transmitter CB-1, it will trigger 4 relays on the receiver at the same time. As thus, four electric gadgets will be turned on at the same time once receiver received command. When you press the button again, turn off four electric gadgets simultaneously.