2 Channel Time-Delay Remote Controller Controls Pool Rolling Shutter Open and Close

There are various types of pool rolling shutters such as winter shutters, solar shutters, and safety shutters. All kinds of shutter can prevent leaves or other things falling in pool. Winter pool shutter can keep water warm when winter comes. Safety pool shutter can prevent accidental drowning, especially for children. No matter any purposes for pool shutter, it is most important for pool shutter to be convenient to you. So maybe you really need to your retrofit your pool rolling shutter instead of manual control. You can remote control your existing shutter motor to realize open and closed.

pool shutter

You may wonder how to do this. Please see the following.

You will see the 2 channel time-delay remote control kit (S2DA-AC220+C-4), ac motor or other gadgets.

1 x 2 channel delay time adjustable receiver (S2DA-AC220)

1 x 4-button transmitter (C-4)

AC power supply

Wire

material

You can see the wiring diagram. AC motor is supposed to connect to common terminal B. Live wire is connected to normally open terminals C. And neutral wire is connected to AC motor.

wiring diagram

wiring

Here comes to operation

At first, we set delay time 8 seconds for relay 1 and 10 seconds for relay 2. Then switch on power.

Press button 1, the motor rotates continuously in the positive direction.

button 1 positive rotation

If we want to interrupt the rotation, we can press button 3, the motor stops rotating immediately.

button 3 stop

Press button 2, motor rotates continuously in the reverse direction.

button 2 reversal rotation

If we want to interrupt the reverse rotation, press button 4, the motor stops right away.

button 4 stop

Time Delay Mode

Press button 1, the motor positive rotation will last 8 seconds which is set in advance, then stops rotating.

button 1 time delay

Press button 2, the motor reverse rotation will last 10 seconds which is preset, then stops rotating.

button 2 time delay

Video:

How to remote control a hydraulic lift up or down by wireless transmitter & receiver?

Question from customer:

Can you recommend a system? I need use to provide momentary control of a hydraulic lift, up and down. It will need two transmitters and 120 v ac is preferred.

 

Answer:

We advise you use the wireless system by remote control. It is model: S1FM-AC220 & 1CV-2-2. The receiver (S1FM-AC220) is momentary control mode and can control a motor running. The transmitter (1CV-2-2) can wireless remote control the receiver through launching wireless RF signal to receiver and its working distance is 500m/1500ft theoretically. That means if you are within the distance, you can remote control the hydraulic by using the wireless transmitter. Of course firstly you need to connect receiver and the motor of hydraulic. Then when you press the button of the transmitter, the motor will positive rotation or reversal rotation. So you can remote control the hydraulic up or down by using the transmitter.

1_13

Besides, the wireless system can control motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals. You just need to connect the motor of appliance and receiver, then press the button of the transmitter. You can turn on/off the appliance by wireless remote control.

 

This is the usage about the wireless remote control system. It just has one control mode: Momentary. You can operate the system according to following processes:

Press and hold button ▲ on transmitter or receiver: Terminals UP and COMMOM directly output AC110V / AC220V; motor rotates continuously in positive direction, the hydraulic is up.
Release button ▲ on transmitter or receiver: Stop the motor.

Press and hold button ▼ on transmitter or receiver: Terminals DOWN and COMMOM directly output AC110V / AC220V; motor rotates continuously in reversal direction, the hydraulic is down.
Release button ▼ on transmitter or receiver: Stop the motor.

1_091_03

      Here is the circuit diagram of receiver. Firstly you should connect live wire to terminal “L” and neutral wire to terminal “N”.Then connect one AC motor of the hydraulic to terminals “UP”, “COMMOM” and “DOWN”. By the way, you can exchange “UP” and “DOWN” wires of motor to change the rotating direction of motor. Finally supply power to the receiver. The hydraulic can be remote control up or down through pressing the button of wireless transmitter.

1_06

If you would like to know more something about the wireless remote control system, you can enter into our website and search the product as following:

 

Model: 0020325( S1FM-AC220 & 1CV-2-2)

 

Website:

http://www.carymart.com/

 

http://www.carymart.com/ac-100240v-motor-momentary-remote-control-transmitter-receiver-p-1505.html