One customer said he would like to install 6V led lamp into the trunk of his car and wants to control it by remote controller. He is wondering if it can come true because he wants to use LED lamp to illuminate with use of 6V battery.
We recommend him 1 channel 6V latched remote control kit (S1L-DC06+C-2).
This kind of remote control kit is activated by 6V power supply. So he doesn’t have to supply additional power for led lamp because led lamp will get power from powered receiver as long as you wire lamp to the receiver. With latched mode, he can press button 1 of transmitter to turn on led lamp and press button 2 of transmitter to turn off led lamp. If he wants to set on / off function respectively, it is better choice. It has normally open and closed contact. It controls various lights, fans or motors with voltage AC110~240V or DC0~28V. Of course, if he wants to remote control alternate current device, he needs to do some different wiring from direct current device.
Here is the wiring procedure of 6V led lamp which shares the same battery with receiver. The red wire from the lamp is connected to the C terminal of the receiver and black wire from the lamp is connected to the negative electrode of the power supply. The positive wire of the supply power is connected to B terminal and positive electrode of the receiver. The negative electrode of the power supply of power supply and receiver are connected together.
When he presses the button1, turn on the led lamp; when he presses the button 2, turn off the led lamp.
Follow