Question from customer：
Hello, can you supply me with 2 single on/off receivers with using just 1 transmitter? I have 2 separate 24 volt led lamps in separate locations in my motor home, but I just want to operate all lights from 1 transmitter.
Answer：
We recommend you 2 voltage output toggle receivers (S1XT-DC24) and 1 transmitter (C-2). Wire each led lamp to each channel of receiver. It is voltage direct output. The led lamps can get power through receiver directly. It outputs DC24V power. With fixed toggle working mode, you can use transmitter to press button 1 & 2 to turn on lamps, and then press again to turn off lamps. There is no interference between receivers.
We prepare a simple demonstration for your reference. At first, we prepare the following material.
They are remote control kits, led lamps, power adaptors, lines
According to the following wiring diagram, we made wiring. Two led lamps are connected to A&B terminals of receivers respectively. And supply 24V power to receiver.
Press button 1, switch on lamp 1.
Press button 1 again, switch off lamp 1.
Press button 2, switch on lamp 2.
Press button 2 again, switch off lamp 2.
Video:
Follow