RF remote control transmitter & receiver model of 0020204 (S12CA-DC09/12/24 & CV-12) includes one 12-button remote transmitter and one 12-channel receiver. Each remote button controls each channel of receiver on and off. It can be used to control at most 12 same or different on / off electrical devices. Remote distance is up to 500m. It is widely applied for remote controlling on / off electrical devices such as lights, fans, electric door locks, etc. When you want to control many devices with one transmitter, we think this multi-channel remote control is very favorable. It is powered by direct current (DC). But we still can use it to control alternating current (AC) motors here. We can not only switch on or off motors but also control them forward-reverse rotation.
Look at the following show.
First off all, we prepare material.
1×12CH rf receiver
1×12-button transmitter
2×AC motor
Some lines
Power supply 220V
Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C. (We choose 4 channel to control 2 motors as example)
We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.
Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.
Press and hold button 2, motor 1 rotates in reversal direction. Release the button, motor stops.
Press and hold button 3, motor 2 rotates in positive direction. Release the button, motor stops.
Press and hold button 4 , motor 2rotates in reversal direction. Release the button, motor stops.
Operational Video:
Follow