4 Channel DC RF Wireless Transmitter Receiver for 2 AC Motors

This 4CH RF wireless remote controller operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete four operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc.

remote control

We will try to show you how to control positive and reversal rotation of two AC motors with this remote module. Let’s see the following material.

1×4CH rf receiver

1×4-button transmitter

2×AC motor

Some lines

Power supply

S4C-DC&C-4 material

Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C.

circuit

S4C-DC&C-4 wiring

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

S4C-DC&C-4 button 1 positive rotation

Press and hold button 2, motor 1 rotates in reversal direction. Release the button, motor stops.

S4C-DC&C-4 button 2 reversal rotation

Press and hold button 3, motor 2 rotates in positive direction. Release the button, motor stops.

S4C-DC&C-4 button 3 positive rotation

Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.

S4C-DC&C-4 button 4 reversal rotation

Operational Video: