June 2013 – Page 2 – Remote Control Everything

Wireless Automatic Garden Watering System and Remote Control Lamps

Question from customer:

Can you help me select the correct product? The distance is 600 feet through house with walls and some trees. I need to turn on a 220 volt garden watering system for my plant. There is a solenoid valve connecting to the spray head of the system. I also want to turn on at least three other dc 12 volt circuits separately for lights.The control panel has a switch on it right now that I would like to be able to still use if necessary.

Answer to this question:

We recommend this four function distant-range rf remote . The working voltage range of relay is AC 110—240V or DC0~28V. The highlight of this product is that it can activate different electrical devices with different working voltage simultaneously.There are totally four channels. It is 10amp current for each channel. The working distance is up to 2000m (6000FT) in open air with external mount antenna. It is very appropriate for garden watering system.

We make a demonstration of this remote controlling.

Let’s look at the following material.

As seen in the picture, three spotlights should be connected three relays’ normally open terminal individually and be supplied DC 12 V power supply. The pond fountain will be connected to last one relay’s normally terminal and be supplied AC220V power supply.

There are 4 buttons on the transmitter. One button controls one relay. Usually, we set “Toggle Mode”.

So press button “A”, turn on the led light strip 1.

Press button “B”, turn on the led light strip 2.

Press button ‘C”, turn on the led light strip 3.

Press button “D”, turn on the solenoid valve.

Press buttons one by one again to switch off all of them.

Long Range RF Remote For Dragonboat Competition Starting Light System

Recently, a customer came to us to look for remote control system for a starting light system for dragonboat competition, he would like to use your one 8 channel remote and 3 CB-8 transmitters for getting timing splits from 3 different locations on a race course, the distances from the receiver and the transmitter is 1500 meters, 1000 meters and 500 meters. He wanted to know it is possible to do?

This dc power long range RF remote— 0020353 (S8CA-DC12-ANT2 & CB-8) may be favorable for him. With 8 working modes, this kind of RF remote can be set different working mode as long as you like. The maximum working current of each relay is 5amp. The working distance is up to 2000m (6000FT) in open air with external mount antenna. The most important point is that one receiver can pair with three transmitters when they are used together.

As seen in the picture, each light is connected to normally open terminal of each relay individually.

So as the customer said, this remote control is for starting light system to get timing splits from 3 different locations. Then, the first person goes to 1500 meters from the receiver with the first transmitter. The second person goes to 1000 meters from the receiver with the second transmitter and the third person goes to 500 meters from the receiver with the third transmitter.

Each person in different location can remote control the same receiver.

Grant Range Remote Control is used in Metal Shed Warehouse

Our grant range remote control, S1PUA-AC220-ANT2 & CB-2 was purchased by one of our customers recently. He said that he was so happy with the items because of its good performance. What’s more, he also satisfied with our fast delivery and product tracking service.

That customer said that it is more importantly for remote control kit is to work well even in his metal shed warehouse. For installation of a device controlled by remote controller in his house, that customer also has tried other brands’ RF products but none of them can work as well as ours.

The receiver is high power with maximum working current of 30A. It has three working modes which are toggle mode, momentary mode and latched mode. The RF signal can pass through walls, doors, floors, trees and so on. With the external mount antenna, the receiver pairs with long range transmitter-CB-2. Remote control distance of transmitter & receiver set is up to 2000m in open field.Thanks to this external extend antenna design, it enhances RF signal’s transmitting and makes excellent performance.

The wiring is not complicated. Just do as the following picture.

Lamp or other devices should be connected to normally open terminal A&B at first. Then we wire up the receiver. Press big button on the transmitter, the lamp or other devices will on; Press small button on the transmitter, the lamp or other devices will off.

One Transmitter Controls 4 Garden Goods Shop Lighted Signs

One of our customers has 4 small lighted exterior signs around a garden goods shop building and would like to control all four signs to go on and off by a simple RF system switch. He is wondering whether this is possible or not?

Our suggestion is that he can order 4 receivers for remote control model of S1X-AC220-ANT2 and one grant range remote transmitter CB-4. All lighted signs are respectively installed to each receiver for longer remote distance.

The theoretical transmitting distance is 2000m (6000FT) in the open field. Even though in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. It is still enough for the exterior signs around the building.

4 lighted signs should be wired to 4 receivers’ L&N terminals individually. Wiring diagram as shown below:

Press button “A”, switch on sign 1; Press button “A” again, switch off sign1.

…

Press button “D”, switch on sign 4; Press button “D” again, switch off sign 4.