April 25, 2013 – Remote Control Everything

Long Range Automatic Water Pumping System

Recently, our company is promoting a brand new remote controlling product which is specially designed for controlling the water pump motor.

It is the automatic water pumping system.

There are some remarkable characteristics of this new product. We add external extend antenna which makes the transmitting distance of this system as long as 2000m. There are two operation methods of this remote controller. The first method is to control water pump motor with manual controller. The second method is to control water pump motor automatically by two mini water level sensors.

The manual operation is fairly easy. When pressing the big button of the transmitter, CB-2, the “ON” signal will be sent to the receiver. The receiver will instruct water pump motor to pump water into the tank. When pressing the small button of the transmitter, CB-2, the “OFF” signal will be sent to the receiver. The receiver will instruct water pump motor to stop pumping water.

Pumping water automation by water level sensors is the highlight of this product. The key technology is the transmitter, CB-2N-2, which is designed to have 3 external wires. We named them wire 1, wire 2 and wire 3. The three wires will be connected to two mini water level sensors.

Let’s show you how it works.

First step, it is installation.

Put the water level sensor 1 downwards and install at the low water level position; Put the water level sensor 2 upwards and install at the high water level position.

Two wires of the water level sensor 1 are connected to wire 1 and wire 3 of transmitter CB-2N-2.

Two wires of the water level sensor 2 are connected to wire 2 and wire 3 of transmitter CB-2N-2.

Motor should be connected to A&B terminal and L&N terminal of receiver S1PUA-AC220-ANT2.

Second step:

When water reaches the low water level, two wires of the water level sensor 1 is connected and the transmitter is triggered. The transmitter will send an ‘ON”’ signal to the receiver. The receiver will instruct the water pump motor to pump water into the tank.

When water reaches the high water level, two wires of the water level sensor 2 is connected and the transmitter is triggered. The transmitter will send an “OFF” signal to the receiver. The receiver will instruct the water pump motor to stop pumping water.

1 Transmitter and 8 Receivers RF Long Range Control System Switch 8 Lights On and Off

I am an electrical supervisor for Acorn Lighting Services based in UK. We are a big installer of festive lighting and have been asked by some of our clients if we can supply remote switch to turn on and off all the lights which are controlled at the same time. Now I need 1 transmitter and 8 receivers all working on the same channel. The receivers will need to 240v and be capable of controlling 980 watts lights totally. Can you supply a remote control system where there is one transmitter and 8 receiver units with antenna?

We recommend the long rang one to many rf remote control kit.

This control system operating voltage is AC110~240V. It is very favorable for this customer’s need.

They are long range remote control kit with external extended antenna.

According to this customer’s requirement, we will provide him with 1 transmitter and 8 receivers to control 8 lights simultaneously. (The following picture showed what he wanted)

So each of receivers will be paired with a light.

Wiring operation is also fairly simple.

Let’s do some demonstration in practice. First, we prepare a transmitter, two receivers and two lights. Next, we will try to show how to control two lights at the same time.

Wires from light are supposed to be connected to the output terminal of the receiver. We do it one by one. And receivers must be all powered by power supply.

Pressing the big button, 2 lights will be turned on simultaneously.

Pressing the small button, 2lights will be turned off at the same time.

Online shop: www.carymart.com

Long Range Wireless Remote Control 3 phase Power Water Pump

I have a pump that supplies my farm with water. The motor on the pump is 3.7kw and is 3 phase power. The pump fills a 5000 litre tank which lasts about a day. The on-off switch is roughly 400m away from my house (no line of sight, lots of trees in-between). Would I be able to connect it to the switch so that I can switch the pump on and off from home 400m away?

We recommend this long range AC latched rf remote control system.

With external extended antenna, this remote control unit can be long range controller. Transmitting distance is about 2000m. How to remote control 3 phase power water pump? Besides the transmitter and receiver, we should prepare a relay which is applied to the pump.

Step 1, the relay should be connected to the receiver. Then three live wires are connected to the relay and 3 phase power supply.

Step 2, another three live wires to connected the relay and water pump.

Step 3, power to the receiver. Pressing the big button of the transmitter, the receiver will receive an “ON” signal to instruct the reply and pump to work. Pressing the small button of the transmitter, the receiver will receive an “OFF” signal to instruct the reply and pump stop working.

Online shop: www.carymart.com/